02/08/2022
It’s been a while since I last posted!
Here is a prime example why the following steps are a must when restoring a decking!!!
Don’t be fooled into just sanding back the decking and coating.
Sanding previous coating doesn’t achieve this finish. With decking oil it penetrates into the timber meaning by sanding it doesn’t remove all the oil.
Our steps followed to achieve the decking looking like new again are
Step 1- apply stripper and pressure wash it off (removes water based and some oil coatings)
Step 2- apply deep wood cleaner and pressure wash off (draws all the oil fro the timber to the surface)
Step 3- apply rejuvenator then wash off (removes oil that’s been drawn to the surface restoring the timber to original colour)
Step 4- sand
Step 5- apply Haymes Uvex primer
Step 6/7 apply 2 coats Haymes Uvex Stain
If your interested in getting your decks restored or have an enquiries please contact. Happy to help but please don’t be sucked into just sanding it.
You will never achieve this finish and your money washed down the drain