14/08/2020
How to use:
1.Grate your design on computer
2.Flip your design horizontally to make it a mirror image of itself.Place the SHINY side DOWN on the cutting mat.
3.Weed the useless film around the image.
4.place the front image in the place where you want to transfer on the garment
5.Apply from 6.6-13.2lbs pressure at 145-160°C degrees for 15 -18seconds.
6.When it is cold, remove the polyester backing film.
Remark: we recommend you to perform a test prior to standard production.
Warming:
1.Don’t use steam when ironing!If steam iron is your choice,select ”No Steam” and make sure there is no water in the iron
2.Don’t iron directly on image after transfer
3.Wait 24 hours prior to first wash