Stove Fitting Solutions

Stove Fitting Solutions HETAS Registered
(1)

Before Christmas we opened up this chimney breast to expose the original brickwork, whilst creating the opening we notic...
01/02/2026

Before Christmas we opened up this chimney breast to expose the original brickwork, whilst creating the opening we noticed that the original plasterwork had blown so we removed it all and boarded ready for plastering (customer opted to plaster himself but we can do it if required). I returned after Christmas to install the beam to finish off the install, the customer has used the stove a lot and was over the moon with the heat. 🔥

Charnwood C5 with log store and bespoke slate hearth installed into this kitchen extension with Poujoulat flue system th...
01/02/2026

Charnwood C5 with log store and bespoke slate hearth installed into this kitchen extension with Poujoulat flue system through the roof and up to regulation height. 🔥

Updated this inglenook by removing old canopy and  timber frame that had been installed to block the chimney off, new cu...
01/02/2026

Updated this inglenook by removing old canopy and timber frame that had been installed to block the chimney off, new custom metal plate scribed into the old stonework to seal off chimney ready to install a Clock Blithfield 5 with log store. 🔥

Customer created his opening ready for us to install a Parkray Aspect 5 with chimney liner. 🔥
09/11/2025

Customer created his opening ready for us to install a Parkray Aspect 5 with chimney liner. 🔥

We opened this fireplace up to expose the original brick work and archway, new hearth and stove fitted 🔥
08/11/2025

We opened this fireplace up to expose the original brick work and archway, new hearth and stove fitted 🔥

A recent install we did where the customer prepared the opening and painted the bricks black. New carpet fitted and room...
26/10/2025

A recent install we did where the customer prepared the opening and painted the bricks black. New carpet fitted and room decorated ready for some cosy winter nights. 🔥

This is my Stovax Riva Studio 1 fitted 10 years ago, still going strong after an annual chimney sweep and service. 🔥
26/10/2025

This is my Stovax Riva Studio 1 fitted 10 years ago, still going strong after an annual chimney sweep and service. 🔥

This is the 2nd Contura stove we fitted for this customer. First one in a cold conservatory making it usable in the wint...
26/10/2025

This is the 2nd Contura stove we fitted for this customer. First one in a cold conservatory making it usable in the winter. They loved it that much they had us back to install a Contura 870 style with slate hearth into the front room. 🔥

As part of this customers renovation project we installed this Dunsley Avance 500 into the original brick fireplace. 🔥
26/10/2025

As part of this customers renovation project we installed this Dunsley Avance 500 into the original brick fireplace. 🔥

We created a tall opening, installed a grey slate hearth,  brick slips and oak beam with a lovely modern stove with a lo...
26/10/2025

We created a tall opening, installed a grey slate hearth, brick slips and oak beam with a lovely modern stove with a log store to fill the space nicely. 🔥

We installed a new stone slab hearth to replace the old quarry tiled hearth before installing this stove to give this lo...
26/10/2025

We installed a new stone slab hearth to replace the old quarry tiled hearth before installing this stove to give this lovely inglenook a modern look. 🔥

We carefully removed this stone surround to create an opening in the chimney breast. We then installed a riven slate hea...
26/10/2025

We carefully removed this stone surround to create an opening in the chimney breast. We then installed a riven slate hearth before refitting the fireplace and installed a Contura 210. 🔥

Address

Kidderminster

Alerts

Be the first to know and let us send you an email when Stove Fitting Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share