Agrekom - spraying systems for plasters and paints

15/06/2026

Gypsum plaster is about more than just aesthetics. ✨

Most people focus on the appearance of the finished wall. However, the final result is not determined by a single factor, but by the entire process – from substrate preparation, through material application, to the final finishing work.

A properly applied gypsum plaster makes subsequent finishing stages easier and provides a solid base for painting or skim coat application.

For fast application, use a plastering machine – check out our range 👉 https://www.agrekom.co.uk/spraying-machines.html

03/06/2026

How do you clean a plastering machine? 🫧

In the third part of our tutorial series, we show step by step how to clean a plastering machine properly after finishing work – from emptying the tank to cleaning the most important components of the entire system.

Find the full video on our website 👉 https://www.agrekom.co.uk/tutorial-videos -job-cleanup

20/05/2026

Is your spraying machine ready to work? 🔥

In this part, we show how to thoroughly prepare the plaster spraying machine for application – from setting up the equipment to starting work with the material.

Correct configuration affects stable spraying, overall working comfort, even material flow, and also helps reduce problems that may occur during application.

This is another part of our instructional series, and you can watch the full version of the video on our website 👉 https://www.agrekom.co.uk/tutorial-videos -startup

11/05/2026

From unpacking to assembling the key components. 🔥

See how to correctly assemble the new machine step by step and prepare it for first use.

Watch the full instructional video on our website 👉 https://www.agrekom.co.uk/tutorial-videos -and-assembly

Another video, this time on preparing the spraying machine for application, coming soon!

20/04/2026

Do you already have your Agrekom set? Time for a change. 🔥

We have prepared a 20% discount on a new hopper tank of any capacity for our existing customers.

If you are using an older model and would like to move to a newer solution, now is the right time to purchase a new model.

The new tanks include, among others:

– easier material flow thanks to the conical bottom;
– easier cleaning thanks to the new lower outlet removal system;
– simple servicing of the lower ball valve (the new valve model can be easily dismantled);
– more stable base with 4 wheels (the previous version had 3 wheels);
– additional smooth transparent protective layer over the green powder coating (helps material flow);
– quieter rubber wheels;
– option to install a vi****or for dense, heavy plasters;
– welded holders for spray guns;
– quieter tank pressure release thanks to the silencer;
– new pressure regulator model.

The promotion applies to the tank only (not the full set), is valid until 04.05.2026, and is available exclusively to customers who have previously purchased an Agrekom machine from us.

Write to us at [email protected] or call +442081577150 for more details.

04/04/2026

Happy Easter! 🐣

We wish you many joyful moments with your loved ones. May this time allow you to relax and recharge before your upcoming projects on site. 🌿

Agrekom Team

30/03/2026

Want to achieve this effect on your facade? 👌🏻

The facade plaster finish has a distinctive texture – but only when the material is applied correctly.

Here, working speed and even application are key. With manual application, it’s difficult to maintain a consistent texture, especially on larger surfaces.

Spray application allows you to work faster and more consistently. The material is applied evenly, and the final effect depends mainly on how you control the spray pattern.

Have a look at our spray units for facade plasters 👉 https://www.agrekom.co.uk/spraying-machines.html

20/03/2026

Guess which plastering machine British Gypsum used. 👀

That’s right! For applying Thistle MultiFinish to plasterboard, they chose an Agrekom spray unit with the industrial AGT-40 spray gun.

See how the material behaves during spray application:
https://youtu.be/fej3uBdErzw

Have a look at our new machines 👉 https://www.agrekom.co.uk/spraying-machines.html

Thistle MultiFinish is now sprayable. The game is about to change.

11/03/2026

British Gypsum conducted a test using Thistle MultiFinish. 🔥

The aim was to check the adhesion of the material to plasterboard when applied by spraying. Thistle MultiFinish was applied using an Agrekom plastering machine together with the industrial AGT-40 spray gun.

How did it turn out? You can judge for yourselves: https://youtu.be/G89aYESJApY

More information about the test can be found on the British Gypsum website 👉
https://www.british-gypsum.com/spraying-thistle-plasters

The equipment you see in the video is available in our shop 👉
https://www.agrekom.co.uk/spraying-machines.html

Watch to compare plastering by hand versus spraying.

02/03/2026

Can you apply MultiFinish using the Agrekom plastering unit? 💁🏻‍♂️

We carried out a test using our plastering machine together with the AGT-40 industrial plastering gun.

See how it works in practice – and if you need any clarification, feel free to contact us!

______
+442081577150
[email protected]