PILA Planners & Builders

05/02/2021

Prayer 2d Holy Spirit;
When im weary keep me strong when im confused regain my senses,when im lost guide me back,whenever i neede u most pls be there.

28/01/2021

Spacer

09/01/2021

27/12/2020

This Feb of 2021
Proposed2 storey Residence
Of Sps.Rowena & Eduardo Pacure.
Kamputhaw Cebu city.

03/12/2020

19/11/2020

Spalling is a term used to describe areas of concrete which have cracked and delaminated from the substrate. There are number of reasons why spalling occurs including freeze thaw cycling, poor finishing techniques, bad concrete mix or the corrosion of embedded steel reinforcement bars or steel sections.

Spalled concrete is not attractive and makes a structure look uncared for. More seriously, if the structure is in an area accessed by the public, or by workers, then spalling can be hazardous in terms of falling debris or trip hazards. If left unchecked, then spalling will tend to accelerate and spread so that, eventually, the structure could become unstable. To prevent any accident, it must be repaired as soon as possible using rapid setting mortar that can bring back its concrete strength.

CONCRETE PATCH H is a cementitious pre-packed repair mortar with shrinkage compensation properties. It is supplied as a single component powder which only needs mixing with a specific quantity of water to produce a non-shrink, free flowing, fast setting and high strength mortar. It is a blend of inorganic cement, special fillers and chemical additives to control the rate of strength gain. It can be applied up to 20mm to 100mm thickness and can achieve 3000psi in 3 hours.

The cured mortar is durable and weather resistant and it is ideal for use in heavily trafficked areas where a rapid return to service in 2 – 3 hours is critical.