Brandons Auto Body & Paint

Brandons Auto Body & Paint Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Brandons Auto Body & Paint, Painter, Abita Springs, LA.

Passion, precision, and 💯 perfection 👌— Brandon’s Auto Body & Paint brings new life to anything that can be painted or restored.“From cars to consoles — I paint it all!. “Custom colors, quality work, honest prices.” The possibilities are limitless!

You gotta love them transit vans.28oz of base and 32oz of clear. Just for it to get covered up by vinyl lol
05/20/2026

You gotta love them transit vans.28oz of base and 32oz of clear. Just for it to get covered up by vinyl lol

So have these 2 sundown x10's v2. Which I made a custom box for. Box dimensions are 26.5 in d, 31.5 in w and 13.5 in h. ...
05/04/2026

So have these 2 sundown x10's v2. Which I made a custom box for. Box dimensions are 26.5 in d, 31.5 in w and 13.5 in h. 4in by 12in kerf port. Tuned to 30hz. Have them hooked up to a 700 watt amp at 1 ohm. Things flex my windshield. Box wasn't built for a suv which they are in atm. My car is still in the works. Since its a project car.. My question is they slam on certain songs. Or twenty hertz bursts. But on songs I know they should slam on they don't quite. I was just wondering if it's because I have them so under powered atm. Now, what would y'all think the difference would be? Once I get them, the power they need?

So this van I did with a ws 400 series 2 for clear. Its a phenomenal gun guys. Just make sure when you purchase one. ge...
05/04/2026

So this van I did with a ws 400 series 2 for clear. Its a phenomenal gun guys. Just make sure when you purchase one. get the non-digital. Digital ones have a tendency to split down the center of the body. This customer had some bad luck. This is the second time Doing this Van same side and in a matter of 6 months. I've been talking highly about the Exodus. Op 1.5 from luma it's been my go to. Both guns lay down clear great. You can get the same results from either. The difference I can say though, is I have to use a slower activator with the Exodus, to get it to lay down, like I like. With that same activator on the ws its much more prone to run. So i use a faster activator.Now the ws iam using a 1.4 as i did with my series 1. Loads better output with a series 2. So I would say a 1.3 would be about the same as using a 1.4 in a series 1. I've also found out that the series 2 loves and works best with your fan wide open. You can adjust your fluid according to how you spray.. It's the only gun I have that I dont have to turn my fan in a complete turn or more to get where I liked it.. and the gripe that some people have on the series 1 not being consistent at times they have fixed that with the series 2. So all of you who are wondering if it's worth the purchase, if you already have a series 1. I would say most definitely it is. So demo one, or just buy one. won't regret it trust me!

Rental car companies are so cheap on their repairs. Wouldn't give me blend time for the door but I made it work. Plus ra...
04/24/2026

Rental car companies are so cheap on their repairs. Wouldn't give me blend time for the door but I made it work. Plus rate sucks. So I didn't go the extra mile in this one.

Alright guys this isn't a paint post. Its me just looking out for all my fellow stubborn ass painters. Do yourselves a f...
04/16/2026

Alright guys this isn't a paint post. Its me just looking out for all my fellow stubborn ass painters. Do yourselves a favor. PLEASE PLEASE! WEAR KNEE PROTECTION OR ATLEAST USE A PAD.. I know it's annoying and gets in the way. But the amount of pain and seriousness of a skin infection. It beats that 10 fold.. i'm always wearing pants. I don't kneel that often I didn't have any open wound. But my knees were calloused. And I didn't know that bacteria can enter your bloodstream, though a callous.. so my knee got infected, I couldn't bend it. I couldn't barely walk on it. And trust me, it's very hard to do your job. I had to go and get it lanced. All the fluid had to be removed. Sent in for testing, to make sure what kind of infection.It is. Septic infections are no joke. Of course.I'm staying positive everything's gonna be okay.. I'm just saying this so that y'all will be more mindful. What y'all may think might not be a problem.Can turn it into a serious one. SO EVERYONE TAKE CARE OF YOURSELF.

Had to take one for the team today. Insurance said this big rusted scratch running all the way to the rear door on my bl...
04/14/2026

Had to take one for the team today. Insurance said this big rusted scratch running all the way to the rear door on my blend panel wasn't related. I couldn't just clear over rust. So I sanded it out and primed it. Used my 3 stage pearl trick. Figured, if it was a little off, maybe they would see that i need blend time for the door. Honestly it looks d*** close boss said, roll with it.. honda nh883p. What do you guys think?

You can a long booth but still nothing you can do . 17.4 hr job still needs to booth cycles. Still have a new bedside an...
04/13/2026

You can a long booth but still nothing you can do . 17.4 hr job still needs to booth cycles. Still have a new bedside and tailgate repair.

I haven't even been needing a tint white pearls any more.. all I do is take a shot with the camera match as a solid use ...
04/08/2026

I haven't even been needing a tint white pearls any more.. all I do is take a shot with the camera match as a solid use that as my ground coat. And then make standard for the midcoat. Has worked every single time.

Sherwin cc950 with 20%. Great clear. It makes matching oem peel easy. Kind of surprising How much peel this mercedes had...
04/08/2026

Sherwin cc950 with 20%. Great clear. It makes matching oem peel easy. Kind of surprising How much peel this mercedes had from factory. It has different mixes you can set up on your scale. You can customize each formula name on the sherwin system..Its a 3 to 1 to 10-30% reducer. 10% for that notorious chrysler jeep peel. I use 20% for the standard peel. 30% if you want glass. The best thing about it, you don't have to change up settings on your gun.

So i've had this for a minute, it was working great when I first got it. Like eliminated dirt completely. But now it's b...
04/08/2026

So i've had this for a minute, it was working great when I first got it. Like eliminated dirt completely. But now it's back to like, I never had it in the first place. So what i'm asking is there a way to check that its working properly, for what I can tell, it still de statics Raw plastic. or is there anything that needs to be cleaned or looked at to see if it's something I can fix? I've cleaned the wires in the tip with alcohol, as it says to in the manual. But that's really all it says, for maintenance. I keep my air pressure around 50. I could be overthinking, but just curious on does anyone else's have had this issue?

Address

Abita Springs, LA

Website

Alerts

Be the first to know and let us send you an email when Brandons Auto Body & Paint posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category