Rainy Roots Woodworking

Rainy Roots Woodworking Custom woodworking and epoxy décor

This table top is made from black walnut, NO STAIN USED!! The boards are assembled with tongue and groove joinery for ...
02/12/2022


This table top is made from black walnut, NO STAIN USED!! The boards are assembled with tongue and groove joinery for extra strength. The table legs are made from steel and covered with a black ceramic paint. Each leg has two non-slip feet to prevent scratching. The cross support attaching the two legs is wood stained black to match the legs. The four chairs are brand new and are being sold with the table as a set.

Dimensions of Table:
5' x 3' x 31.25"
(Length x Width x Height)

🛒 I am selling this dining set (Table and Chairs) for $1,450. If you would like to purchase this table, please email me at [email protected]. Available for pickup or delivery. I am located in Blachly, OR.

I have not posted a new product in a while but hopefully these cutting boards will get me back into the rhythm again!T...
01/31/2022

I have not posted a new product in a while but hopefully these cutting boards will get me back into the rhythm again!
These cutting boards is made from maple, black walnut and oak. All the wood is local to Oregon. After sanding, the boards are first finished with a natural wood sealer for durability. Then, the boards are treated with multiple layers of a FDA approved food grade wood oil and conditioner. This allows the boards to be safe for food contact and prevents the boards from drying out.

Dimensions:
18" x 11.75" x 0.875"
(Length x Width x Height)

🛒 Go to my Facebook shop if you would like to purchase this item. You can find a link on my Instagram bio.

🌱🍂
10/08/2021

🌱🍂

This charcuterie board is made from three curly maple wood pieces and white translucent epoxy resin. The wood is from ...
10/07/2021

This charcuterie board is made from three curly maple wood pieces and white translucent epoxy resin. The wood is from a local tree off the Oregon coast. The board is first finished with a natural wood sealer for durability. Then, the board is treated with multiple layers of a FDA approved food grade wood oil and conditioner. This allows the board to be safe for food contact and prevents the board from drying out. The first five pictures are of the back of the board and the last five are of the front of the board.

Dimensions:
23 3/4" x 11 1/2" x 7/8"
(Length x Width x Height)

🛒 Go to my my Facebook shop if you would like to purchase this item.

🍁🍂This charcuterie board is made from curly maple wood and custom blue tinted epoxy resin. The wood is from a local tr...
10/03/2021

🍁🍂
This charcuterie board is made from curly maple wood and custom blue tinted epoxy resin. The wood is from a local tree off the Oregon coast. The board is first finished with a natural wood sealer for durability. Then, the board is treated with multiple layers of a FDA approved food grade wood oil and conditioner. This allows the board to be safe for food contact and prevents the board from drying out.

Dimensions:
24"x 11.5" x 1"
(Length x Width x Height)

🛒 Go to my my Facebook shop if you would like to purchase this item.

This charcuterie board is made from black walnut and epoxy resin. Encased in the epoxy is five wheat stalks and six fl...
09/30/2021

This charcuterie board is made from black walnut and epoxy resin. Encased in the epoxy is five wheat stalks and six flower buds. The wheat and flowers lay on top of a black tinted epoxy background that allow the items to stand out. The board is first finished with a natural wood sealer for durability. Then, the board is treated with multiple layers of a FDA approved food grade wood oil and conditioner. This allows the board to be safe for food contact and prevents the board from drying out.

Dimensions:
18.5" x 10.5" x 0.75"
(Length x Width x Height)

🛒 Go to my my Facebook shop if you would like to purchase this item.

Set of four wood and epoxy coasters with a custom holder. The wood used to create this set is black walnut. Two of the...
09/29/2021

Set of four wood and epoxy coasters with a custom holder. The wood used to create this set is black walnut. Two of the coasters have clear epoxy, one has purple tinted epoxy, and one has black tinted epoxy. These colors are incorporated on the side of the coaster holder. The coaster holder has a wooden base and epoxy sides that have an ombre look. It starts out with black tinted epoxy on the bottom, then transitions to purple, and finally clear epoxy on top.

Dimensions:
Coasters- (3.5" x 3.5" x 0.5")
Holder- (4.5" x 3.5" x 2")
(Length x Width x Height)

The pieces are first finished with a natural wood sealer for durability. Then, the pieces are treated with multiple layers of a FDA approved food grade wood oil and conditioner. This allows the pieces to be safe for food contact and prevents the pieces from drying out.

🛒 Go to my Facebook shop if you would like to purchase this item.

Custom serving tray I made for two friends of mine that just got married! Congratulations and I hope you guys have a lov...
09/28/2021

Custom serving tray I made for two friends of mine that just got married! Congratulations and I hope you guys have a loving and amazing life together.

The tray is made from black walnut and Ecopoxy flowcast. This project took multiple pours of epoxy for the different layers of items incased in the epoxy. This was a fun project and a great learning experience. I had never encased anything in epoxy before and it gave me a lot of new ideas for future projects!

Address

Blachly, OR
97412

Website

Alerts

Be the first to know and let us send you an email when Rainy Roots Woodworking posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rainy Roots Woodworking:

Shortcuts

Share

Category