04/12/2022
How hard is it to hang a frame?
Here are some tips that can help you. This is for frames that have a wire in the back.
Step 1. Place frame on wall, decide what height you want to hang the picture. Make a mark on wall, at bottom of frame.
Step 2. Find the center of the wall where you want to hang the frame. (Measure the distance and divide by 2). Make a small vertical mark on wall
Step 3. On the frame, extend the wire towards the top, then measure from the bottom of the frame to the top of the wire.
Step 4. On the wall, transfer the measurent from step 3. Start from the mark you did on step 1.
Step 5. Place a mark where the the marks of step 2 and step 3 meet (if they don't meet, make them meet )
Step 6. Drive a screw or nail on the mark. (If the frame is above 25lbs you'll need a drywall anchor)
Step 7. Hang the frame on the screw and level it. (If you dont own a level, measure from the floor to the bottom of the frame, both corners have to have the same height)
If these steps are too confusing hire a handyman to do it for you
If you have a frame thats heavier than 45lbs I will need to be hung on a wall stud.
If these steps helped you, share a pic of the result!
