JcrOffroad

Call Website Contact the business
The Comanche hasn’t been made since 1992. We just brought back two parts for it anyway.The rally-style roof rack started...
11/05/2026

The Comanche hasn’t been made since 1992. We just brought back two parts for it anyway.

The rally-style roof rack started on Manche, the MJ we built for SEMA in 2016. It was never supposed to be a product. Then the phone started ringing. We sold it for a while, it got the axe, and then the messages came back: “Do you guys still make that rack?”

So it’s back. It bolts on with no drilling, has steel mounts and aluminum rails with T-nut slots, and comes with or without a fairing for a 40" light bar.

And while we were at it, the Classic MJ rock sliders are back too. They’re made from 3/16" box tubing with angled round outer tube, and you can get them powder coated or bare steel if you want to finish them yourself. They fit the short bed.

You kept asking. We heard you.

MJ owners, drop a pic of your Comanche 👇

Guess who just brought back Classic MJ Sliders 👀… oh yeah it was us
11/05/2026

Guess who just brought back Classic MJ Sliders 👀… oh yeah it was us

11/04/2026

Remember the Manche? Years after SEMA, she’s still around. Just spending most of her time parked in the break room.

Also did you know Black Friday sales are live and last all month?

Yeah that’s right, up to 40% off all month for Black Friday deals. *You do not get Corey 40% off*
11/04/2026

Yeah that’s right, up to 40% off all month for Black Friday deals. *You do not get Corey 40% off*

11/02/2026

Deals are now LIVE 🚨

Pulled up behind a Jeep with the plate MUDNUT. But it wasn't the plate that caught my eye.My daughter and I have a thing...
11/01/2026

Pulled up behind a Jeep with the plate MUDNUT. But it wasn't the plate that caught my eye.

My daughter and I have a thing where we text each other funny license plates, so I snapped a picture and sent it to her. Then I looked up at the bumper.

Almost all the powder coat was gone. The rear bumper was covered in rust, and the swing-out tire carrier latch had long since left the chat. A ratchet strap had become part of the design.

Now every time he wants to open his tailgate, the first thing he has to do is unhook a strap.

Sitting at that light, I realized I wasn’t thinking about the bumper anymore. I was thinking about the company that sold it. Who’s he supposed to call? Can he even buy another latch? Will anyone answer the phone?

We hear it all the time: “Why does your bumper cost so much more?” It’s a fair question. Most of the answer is stuff you can’t see in a product photo: the steel thickness, the reinforcement inside, the chemical prep and zinc primer before powder coat, and whether the company will still be around when you need a part.

Best license plate you’ve ever seen? Drop it below 👇

Unpopular opinion: don’t buy a lift kit firstOne of the most common mistakes we see is a new owner ordering a lift befor...
10/30/2026

Unpopular opinion: don’t buy a lift kit first

One of the most common mistakes we see is a new owner ordering a lift before they’ve picked tires or figured out how they’ll actually use the Jeep. A lift changes geometry. Depending on the setup, that can mean steering, alignment, driveshaft and bump stop work too.

Here’s where Brian would spend his first $1,000

Tires first, if the ones on it don’t fit your plans. Then basic recovery and tire gear. Already have good tires? Put it toward rock sliders or other protection for the trails you drive. Not on looks just because you feel like you have to start modifying something.

Real step one? Drive it. Camp in it, hit a few trails, and figure out what bugs you. That’s your next upgrade.

Tires, sliders or recovery gear: where’s your first $1,000 going?

Let's see your LJ Builds, Drop them below 👇
10/29/2026

Let's see your LJ Builds, Drop them below 👇

We got in trouble at SEMA for handing out pizza... But we never handed out a single slice.When we built our Jeep Comanch...
10/29/2026

We got in trouble at SEMA for handing out pizza... But we never handed out a single slice.

When we built our Jeep Comanche for SEMA, we turned it into a pizza delivery truck. Pizza topper on the roof, graphics on the truck, and one promise, 30 minutes or less, anywhere in the country.

At the booth we handed out mini pizza boxes we'd printed by hand. Inside each one was a T-shirt, and apparently we did too good of a job. The company with the show's food service contract got a group together and came over to shut us down for serving pizza.

We had to explain there wasn't any pizza. They were T-shirts. None of it was real.

Years later, Manche is still around. Daryl just broke down everything in our walkaround video. The hood we built ourselves, the 4.6 stroker with a supercharger, and the paint we changed last minute in the mixing room.

What JCR build should we break down next: Realhawk or Ascender?

Why buy your build one piece at a time? 🌭Some things are better together. Our new bundles pair racks, bumpers, skids and...
10/28/2026

Why buy your build one piece at a time? 🌭

Some things are better together. Our new bundles pair racks, bumpers, skids and more, with hundreds of dollars in savings.

Address

7386 Elm Valley Drive
Portage, MI
49009

Opening Hours

Monday 8:30am - 4:30pm
Tuesday 8:30am - 4:30pm
Wednesday 8:30am - 4:30pm
Thursday 8:30am - 4:30pm
Friday 8:30am - 4:30pm

Telephone

(269)3531184

Alerts

Be the first to know and let us send you an email when JcrOffroad posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JcrOffroad:

Shortcuts

Share

Nearby home improvement businesses