Hingemate

Hingemate IF YOUR DOORS SWING OUTWARD THIEVES KNOW THEY CAN REMOVE THE HINGE PINS TO GAIN ENTRY IN SECONDS! Hingemate™ passive deadbolt system.

The passive security and safety provided by the Hingemate™ is worth a thousand times its cost. By taking a few minutes to install the Hingemate™, you can insure your property with a lifetime of security. Hingemate pins are case hardened steel, the machine thread is a 12-24, the wood thread is a #10 and the driving Phillips end is #2. Life Safety Codes require that entrance doors on commercial, ind

ustrial and institutional buildings swing outward. Because of this, their hinges are mounted with the hinge pins exposed to the outside. These exposed pins can be removed and replaced in only seconds by thieves or vandals. Entry and exit can be made quietly, with no effort and no criminal tools. Entry doors, residential and commercial Interior doors, inter office, computer room, records rooms. Schools, interior and exterior doors, classroom doors, record rooms. Hurricane zones in Florida needing out-swinging doors. Safe room doors that protect your most valuable items, your family!

We had a customer in Colorado buy Hingemate's after students were entering a computer room and removing equipment and no...
05/28/2022

We had a customer in Colorado buy Hingemate's after students were entering a computer room and removing equipment and nobody knew how until another student told about how they would remove the hinge pins and enter the room and replace the pins after they were outside. No damage was done and yet equipment was missing. Adding Hingemate Security Pins stopped this!

05/28/2022
05/28/2022
12/14/2021

We had a customer concerned about the door hinge security screws they purchased. We tell people that the trademarked Hingemate product we have been manufacturing since 1989 has been knocked off by a Chinese company. However our Hingemate product has been engineered for its purpose and is manufactured in the USA. Here is what the customer had to say.

"FYI, we mistakenly tried the Chinese knockoff first (didn't know at the time) and was refunded for defective item. Their threads appear to be 5.5Mx1.0mm (not 12-24 SAE, not standard metric, though a tap exists) for the machine thread section. Also, their threads are closed off at the bottom, so it has to be filed open to thread it into anything. Thought you might like to know how much they messed up your design when they copied it. Total fail for steel doors.
Thanks for a great product."

We appreciated the feedback from a satisfied customer.

It is a beautiful Sunday morning here on the coast of Lake Erie. We like to replace our flags around the beginning of Ma...
05/02/2021

It is a beautiful Sunday morning here on the coast of Lake Erie. We like to replace our flags around the beginning of May, a shout out to Valley Forge flag for the great quality Koralex material that takes the abuse mother nature on the coast of Lake Erie hands out.
We wish everyone a great summer on the lakes and all around the world!

While cleaning out some old files this week I came across the first generation of Hingemate. It was a screw machine made...
11/13/2020

While cleaning out some old files this week I came across the first generation of Hingemate. It was a screw machine made part and only worked on metal doors with metal threads. We have made many improvements since 1989 👍🇺🇸

We knew this would happen. With people not around to monitor their property during the lockdowns. It is so much easier f...
04/05/2020

We knew this would happen. With people not around to monitor their property during the lockdowns. It is so much easier for bad people to take advantage of the situation. Be safe everyone and be secure with Hingemate as well!

Erie Products LLC developed the Hingemate™ passive deadbolt system. The passive security and safety provided by the Hingemate™ is worth a thousand times its cost. By taking a few minutes to install the Hingemate™, you can insure your property with a lifetime of security.

Address

Sandusky, OH

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 4pm
Thursday 8am - 4pm
Friday 8am - 4pm

Alerts

Be the first to know and let us send you an email when Hingemate posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hingemate:

Share