MBM Brothers Welding Works

04/12/2025

Nothing too big or too small
Call us for a quote 0735320517

13/10/2025

14/01/2025

19/12/2024

What not to do and use when installing Rhinoboards

- do not use nails(any kind). Use designated screws(drywall screws 25mm or 32mm)
- do not use screwdrivers to put in screws, instead use powered tool(drill)
- use blade cutter, avoid using knife to cut boards. You can use a knife to open holes for plugs and switches due of its thickness.
- do not use a hummer in an situation encountered.
- when on duty, do not cut boards outside on a rainy weather, they are very easily on losing shape or getting damaged.
- when cutting boards make sure you cut them against the wall, if you're alternatively using a floor to cut them, make sure you use one of your knee down for balance, do not step on them with your feet, they can easily break.
- to cut straight, do not use a plunk, use the far end of an off cut.
- when taking measurements make sure you write them down or if good on memorizing, you can use your memory but always make sure you double check for correct measurements. Once you cut a board off you cannot undo the process.
- when screwing the boards on the frame, use much screws as you can(15cm far from each other).
-where boards are being joined, always make sure there is a plunk underneath.
- add more plunks on your frame for stability and reliability.

Installing Rhinoboards needs creativity, skill, passion and patience.

Don't work for money, work for a better results and get paid after. Put your customer first because a happy customer means a good business and reputation...most of all, a good relationship with your clients.

01/11/2024

available on request

01/11/2024

kitchen cabinets available on request
can be designed to fit customers needs

01/11/2024

different coffee tables available on request

01/11/2024

MBM
2025

01/11/2024

Bed frames can be designed for clients needs

01/11/2024

can be designed according to clients needs