MMotors SA

28/01/2026

Bathroom toilet domestic designer extractor fan 123mm Grey Metallic
Modern design extractor fan for bathroom, toilet, domestic or office applications. Easy removable gently curved front panel. The motor of this fan is built with low noise ball bearings with long life service of over 40 000 hours of continuous operation and with automatic internal heat protection switch. Equipped with back shutter to prevent back draught air while also stopping insects from entering your premises.
Note: Please remove back shutter if the fan is mounted to the ceiling.
Extraction rate per hour: 165m3/h
Power consumption: 13W
Noise level: 30 dB
Colour: Grey Metallic

28/01/2026

Extractor fan BLACK WAVE 100mm

The WAVE household exhaust fan is used for continuous and intermittent ventilation of toilets, bathrooms, and other rooms to remove moisture and maintain an optimal microclimate. Suitable for installation in ventilation shafts and connection to air ducts.

Tech:
Voltage: 220V/50Hz
Flow rate: 95m3/h
Power: 14W
Noise level: 25dB

Features:
With mounting tabs - allowing the fan to be installed without drilling the wall.
Stylish front panel easily removed for cleaning and maintenance
Low noise level - 25 dB(A)
Colour: Black classic - deep black glossy shade
Thermo-fuse - switches off the fan in case it overheats

28/01/2026

Ducting Inline Extractor Fan 100mm

Quiet and efficient inline ducting extractor fan for domestic purposes.
Connects to 100mm air ducting pipe.

Technical details:
Extraction volume: 107m3/h.
Power consumption: 14W
Noise level: 35 dB.

28/01/2026

Mixed flow inline duct extractor fan 200mm 2 speed

Mixed flow extractor fan suitable for longer duct runs. Designed to extract or supply air in public or residential buildings – bathrooms, toilets, cloakrooms, small to medium domestic and office premises. The easy assemble and disassemble design – removable central block with a motor, impeller and terminal box makes easy installation and maintenance. Equipped with a long life two-speed single-phase ball bearings motor, built-in thermal protection and automatic restart. The fan has two speeds to choose from when connecting power to the terminals, or using a button (included in the kit and installed separately).
Long life ball bearings motor.
2 speeds – terminal connection or switch button (included and installed separately).
Overheat protection with restart.
Horizontal and vertical installation.

Tech details
Voltage: 220V/50Hz
Flow speed 1: 850m3/h
Flow speed 2: 1100m3/h
Power speed 1: 75W
Power speed 2: 105W
Noise level speed 1: 50dB
Noise level speed 2: 58dB
IP Rating: X44

28/01/2026

Duct inline extractor fan 160mm long life with ball bearings
Duct extractor fan with ball bearings motor guaranteeing 40,000 hours of continuous operation. Easy installation with original fastening system ensures easy installation and maintenance.
Ball bearings motor
40,000 hours continuous operation
Overheat protection

Tech details:
Volume: 320m3/h
Power: 22W
Noise level: 36dB

28/01/2026

Timer bathroom toilet extractor fan 100mm
Extractor fan with timer switch off delay from 0 to 30 minutes. The electric motor is protected by an automatic internal heat protection switch.
Wired to the light switch or a separate switch the fan will continue operating when the switch is turned off for a preset time – adjustable timer from 0 to 30 minutes.
Note:
The fan is with 3 pin connection terminal and requires Permanent Live, Switched Live and Neutral.
Please refer to the wiring diagram.

Colour: White
Extraction rate per hour: 97m3/h
Power consumption: 14W
Noise level: 35 dB

28/01/2026

Window Extractor Fan 200mm
Extractor fan for installation in windows and panels. The fan is equipped with a backdraft shutter to prevent air from entering the room when the fan is turned off. Turning the device on/off and opening/closing the back shutter is operated by the pull cord switch.
Technical date:
Extraction rate: 330m3/h
Power consumption: 25W
Noise level: 47dB
Equipped with overheat protection

28/01/2026

Classic humidity sensor & timer bathroom toilet extractor fan 100mm

Classic design humidity sensor and timer extractor fan for bathroom, toilet, domestic or office premises. Equipped with back shutter to prevent back draught air while also stopping insects from entering your premises. On the front panel there is an LED that lights up when the fan is turned on. The motor is protected by internal heat protection switch.
Note: Please remove back shutter if the fan is mounted to the ceiling.
Wired to the light switch or a separate switch the fan will also turn on when the humidity exceeds the preset level, adjustable humidity sensor 50 – 90%. The timer (adjustable 5 – 30min) will ensure the fan continues to operate for the preset time after the humidity falls below the preset humidity level, or when the light switch is turned off.
3 pin connection terminal: Permanent Live, Switched Live and Neutral.
Please refer to the wiring diagram.

Colour: White
Extraction rate per hour: 97m3/h
Power consumption: 14W
Noise level: 35 dB

28/01/2026

Ball bearing bathroom toilet white velvet matt designer extractor fan 123mm
Velvet white matt designer extractor fan for bathroom, toilet, domestic or office premises. Easy removable gently curved front panel. The motor of this fan is built with low noise ball bearings with long life service of over 40 000 hours of continuous operation and with automatic internal heat protection switch. Equipped with back shutter to prevent back draught air while also stopping insects from entering your premises.
Note: Please remove back shutter if the fan is mounted to the ceiling.
Also available in Black Velvet Matt.

Colour: Velvet white matt
Extraction rate per hour: 165m3/h
Power consumption: 13W
Noise level: 30 dB

28/01/2026

Bathroom toilet domestic designer extractor fan 123mm CHAMPAGNE
Modern design champagne colour extractor fan for bathroom, toilet, domestic or office applications. Easy removable gently curved front panel. The motor of this fan is built with low noise ball bearings with long life service of over 40 000 hours of continuous operation and with automatic internal heat protection switch. Equipped with back shutter to prevent back draught air while also stopping insects from entering your premises.
Note: Please remove back shutter if the fan is mounted to the ceiling.

Extraction rate per hour: 165m3/h
Power consumption: 13W
Noise level: 30 dB
Colour: Champagne

28/01/2026

Ball bearing bathroom toilet black matt designer extractor fan 123mm
Black matt designer extractor fan for bathroom, toilet, domestic or office premises. Easy removable gently curved front panel. The motor of this fan is built with low noise ball bearings with long life service of over 40 000 hours of continuous operation and with automatic internal heat protection switch. Equipped with back shutter to prevent back draught air while also stopping insects from entering your premises.
Note: Please remove back shutter if the fan is mounted to the ceiling.

Colour: Black Matt
Extraction rate per hour: 165m3/h
Power consumption: 13W
Noise level: 30 dB

28/10/2025