Resin Effect Fabrication

Resin Effect Fabrication Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Resin Effect Fabrication, 5 Denten Drive, Bunnaloo.

25/09/2019

Great job

The process of fibreglassing structural ply and the end result.
27/01/2019

The process of fibreglassing structural ply and the end result.

Not bad Rob on a gel coat pin line there. Good point at the end. When you all see 'Pimp my Ride they work with 2 pak whi...
30/06/2018

Not bad Rob on a gel coat pin line there. Good point at the end. When you all see 'Pimp my Ride they work with 2 pak which means they can toil for a long time pulling the main pin strip.
When working with gel coat we only have a a certain amount of time to pull the main pin strip. Weather permitting could be from seconds to 2 minutes.
Thunderstorm weather can see the gel coat JUMP or FEATHER when pulling the pin tape.

30/06/2018

Apologies for not posting in awhile due to us being really busy and I keep forgetting lol.

We removed stickers from a unique style boat. Which is tricky as sun damage can imprint the sticker shape even after rem...
02/12/2017

We removed stickers from a unique style boat. Which is tricky as sun damage can imprint the sticker shape even after removal.
We work through a lengthy process of rubbing using different grades of papers. After we are satisfied, we apply polish and protective wax.
Not always will this be a everlasting result, however maintenance will always try and keep the sticker outline at bay.

This is a picture of a rotted transom. It can be difficult to see the condition from the outside. Below are some tips fo...
07/11/2017

This is a picture of a rotted transom. It can be difficult to see the condition from the outside. Below are some tips for you to try, to ensure your motor is hanging off your boat nice and safe.
We want your boat to stay intact and your skier safe.

Tip 1. Check for visible signs of cracking inside the well and on top and below the transom.

Tip 2. When your boat is off the trailer and the motor is tilted straight up and down, apply pressure in a downwards motion and if there is any movement, it's best to get it checked.

Tip 3. Inside of the b**g, if there is any soppy wood or softness, again best get it checked.

Tip 4. If your silicone around the bolts and plate are gone it's a good chance water will be seeping into the transom.
Also if you have drilled new holes in your transom (mayve to put a ladder on) and haven't used a good quality marine silicone, that again is a good chance water is rotting your transom away.

Resin Effect offers FREE INSPECTION AND QUOTES. Either call Rob or Marina or message us.

Rob 0408302288
Marina 0438608777

Address

5 Denten Drive
Bunnaloo, NSW
5276

Website

Alerts

Be the first to know and let us send you an email when Resin Effect Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share