02/03/2026
These are rustic cat towers made from recycled wood and come in two sizes 1.4m and 2m and 3 different styles.
Actual heights/measurements and wood types may vary, depending on available wood.
STYLE 1 (Pictures 1 & 2)
The 2.0m tower has 4 square arms and a top platform.
The 1.4m tower has 3 square arms and a top platform.
Each arm sticks out from the stem approximately 50cm.
Each platform on the arm is approximately 25cm x 25cm with carpet attached.
Both towers have a 450cm square or round platform on top with carpet attached.
I currently have 4 x 1.4m @$125 and 4 x 2m @$150
STYLE 2 (Picture 3 & 4)
This Style has the platforms on edge of post.
It has 30cm x 30cm platforms on edge of post and a square or round 450cm platform on the top. They are carpeted
Picture 5 shows difference between the arms and platforms.
The 1.4m @($150) and the 2m @($175).
These towers are sold fully constructed except for the tripod feet.
This style is a special order.
STYLE 3 (Pictures 5 and 6)
This style is like style 1 but has edged platforms that are 30cm x 30cm.
The platforms are carpeted
The 1.4m @($175) and the 2m @($200).
This style is a special order.
I sell them deconstructed to aid transportation as they are an odd shape to get into most cars (Pictures 7 & 8)
The longest pieces are the base with top platform at 1.2m and 1.8m respectively.
I can add carpeting to the central column to act like a scratching post for an extra $25 for a 1.4m or $50 for a 2m post. (Pictures 9 & 10)
The plywood platforms are made with marine ply and are stained with quality decking oil, so are good for outside areas.
Each piece is marked up and I supply the screws so you can put it together at your house. (You need a DIY husband or partner to help and will need a power screwdriver).
I can help if you are located close to me.
Pick-up in Ellenbrook.