Beck Inspects

04/06/2026

🚨 HELP ME SETTLE THIS DEBATE 🚨

Which skirting board looks best? 👀

1️⃣ 3 inch
2️⃣ 4 inch
3️⃣ 6 inch

Same room. Same style. Completely different feel.

Drop your choice in the comments and tell me why! ⬇️

03/06/2026

Why use glue pockets when laminating timber? 🪵

Glue pockets help create stronger, more consistent bonds between laminations by ensuring even adhesive distribution throughout the timber. They can reduce the risk of dry joints, improve structural integrity, and help minimise movement or delamination over time. The result? A stronger, more reliable laminated product built to last.

Quality starts with the details. 👌

02/06/2026

40 years on the tools. Wood machinist, welder, fabricator, maintenance specialist, and problem solver. From replacing bearings, motors, and switches to building custom handling equipment and repairing broken machinery—I get the job done.

01/06/2026

Before you blame the blade, check the fl**ge.

One of the biggest lessons in restoration work is that the obvious culprit isn't always the problem. A lot of saw blades get replaced when the real issue is runout in the arbor fl**ge. Even a tiny amount of movement can affect cut quality, accuracy, and finish.

When you're restoring vintage homes, precision matters. Taking a few minutes with a dial gauge can save hours of chasing problems and help deliver cleaner, straighter cuts.

31/05/2026

Why do we cut good timber? Here's why.

It might look wasteful, but end docking removes grit, dirt, stones, splits, and damaged timber that can destroy profile knives and cause costly downtime. It also improves machining quality and helps ensure a consistent finished product.

A small cut at the start can save a lot of money further down the line.

30/05/2026

29/05/2026

The right jig saves time, reduces mistakes and makes every cut cleaner. Once you start making your own, there’s no going back.

What’s the best jig you’ve ever built or used? 👇

Follow for more reno, machining and workshop content 🔥

28/05/2026

Safety first… I’m attached to these fingers 😅🔨

Follow for more reno chaos and message me for custom work 👊

27/05/2026

Custom-built jig in action 🎥

Designed this setup to run multiple splayed profiles through the thicknesser with consistent results and clean finishes. Love building solutions for tricky jobs.

26/05/2026

For those wondering why modern sawmills don’t cut true inch timber anymore — here’s the reality from someone who’s spent decades in the industry.

Over the years I’ve watched timber sizing shrink while prices continue to rise. What was once a true inch is now often undersized, and that creates real problems when reproducing heritage mouldings and restoring older homes properly.

Traditional mouldings were designed around full inch material, and when the timber is smaller, the proportions and profiles just aren’t the same.

That’s why in my workshop, I still mill to true inch sizes the old-fashioned way — because accuracy matters when restoring heritage work and matching original craftsmanship.

If you appreciate traditional timber work and authentic reproductions, follow along for more behind-the-scenes milling and heritage restoration content.