What are the opening hours?

Monday 7am - 6pm Tuesday 7am - 6pm Wednesday 7am - 6pm Thursday 7am - 6pm Friday 7am - 6pm Saturday 7am - 6pm

Aqua Attack Drilling

Home
Australia
Perth, WA
Aqua Attack Drilling

Aqua Attack Drilling are experts in commercial water bore installations. We can provide you with a complete water solution. But why do I need a bore?

About Aqua Attack Drilling:

With close to 50 years’ combined experience in water bore installations, irrigation and reticulation, boring is what we do, and do well. We’ve installed small and large systems throughout Perth helping people just like you save money on their water bills. As specialists in both water bore and irrigation systems, we save you the time and hassle of dealing with multiple

businesses. Our highly trained team are experts in:
Drilling Domestic & Commercial bores
Bore & pump repairs
Submersible pump repairs & installations
Design and install reticulation systems
Well servicing, repairs and more…
To find out more, contact us today or request your free, fixed price quote! As a resident in Perth, on average, close to 40% of your total water usage goes outside, whether it’s on your lawn, garden, pool or even washing the car. That’s close to 41,000 litres of treated drinking water which you’re getting charged for. On top of that, Perth’s water restrictions mean you can only put the sprinklers on twice a week. By using a bore you’ll have access to an unlimited source of untreated water packed with the earth’s natural minerals. You’ll save money on your water bill whilst having the ability to water your garden up to three times per week.

06/02/2026

It’s been a massive start to the year, with both rigs running flat out to keep up with demand across multiple projects.

Rig 2 has been busy drilling several 200 mm production bores throughout the northern suburbs, including the new bore at the Alkimos Aquatic Centre and the Alkimos Central precinct. The new 18,000 L mud tank has already proven its value, performing exceptionally well during lost-circulation drilling.

Rig 3 has been operating in Bullsbrook, supporting DFES within the fire zone. The team successfully installed two production bores in a rapid turnaround to assist with the peat fires burning underground.

Outstanding effort from the crews—keep up the great work. 👏💪

31/03/2025

Another successful 200mm production bore has been drilled and test pumped in extremely difficult cavernous limestone conditions.

This bore serves as a replacement for the existing one, which developed a hole in the screen section after over 20 years of service.

A 24-meter length of 12" steel surface casing was installed to the top of the limestone. The pilot hole was reamed to 72 meters, and the production casing was run to the bottom.

Test pumping was conducted, and the bore demonstrated an excellent flow rate of 25L/sec.

A big thanks to the entire crew, led by the lost circulation expert, Trevor Daley

20/02/2025

The rig 2 crew have had a big week drilling the first of 5 production bores in the new Alkimos Central precinct.

Big groundwater flows and cavernous limestone are always a challenge to drill. Our team have the experience and know how to get the job done.

Well done boys 💪

05/12/2024

With only a few weeks left till the Xmas break, both rigs are out drilling completing the last of this year's jobs.

Rig 2 is finishing up its last bore for the year for the City of Wanneroo in Hocking, while the crew on rig 3 are halfway through a 4 bore project on the new train line.

Next year is looking just as busy so if you require a bore get in touch and book a spot.

13/11/2024

Rig 2 is in cataby this week drilling a 6" production bore for a cattle feed lot.

If you need any bores drilled in the area get in quick as we are almost booked out till after Xmas.

11/09/2024

Last week the team completed a new production bore in Butler as part of our bore replacement contract with the City of Wanneroo.

The bore was drilled to 40m and test pumped at 25L/sec. This will be used to fill the lake which is used to irrigate the entire suburb of butler.

27/08/2024

The crew on rig 2 have been busy these last couple of weeks drilling a leederville aquifer bore at Movida Estate , midvale.

The pilot hole was drilled to the target depth of 130m. Following geophysical logging it was determined that the deeper part of the aquifer had a high salinity level (3000ppm) and the fresher layer was higher up.

Pilot hole was backfilled and sealed off . Hole was then reamed to 55m and constructed with 200mm pvc and 24m of stainless steel screens.

After allowing the grout seal to set ,bore was air lifted clean. The bore was then test pumped for 8hrs with an excellent flow of 10L/sec and low salt content (600ppm)

14/06/2024

It's been a busy last couple of weeks for the team.
Rig 2 has been at Image Resources new Atlas project near Jurien Bay. The crew completed a 155mm 60m production bore drilling into the eneabba formation to supply water for the new camp under construction and also a number of 50mm monitoring bores.

Rig 3 has just completed a number of 155 & 200mm bores for the City of Canning and also City of Mandurah. Test pumping to follow next week.

22/05/2024

Rig 2 is back at it , this week the crew are drilling a number of deep 100m + bores in Wanerie and Karakin.

Get in touch while we are in the area 👍

17/04/2024

The Aqua team have been drilling around the Shire of Gingin for the last couple of weeks. We have just completed a 100m bore on Cowalla Rd for a stock water supply for cattle.

This week we are drilling a 70m 200mm bore in tricky lost circulation limestone country for an orchard on Gingin Brook Rd

The rig will be in the area for a few more weeks, so if you’re after a bore in the Shire of Gingin get in touch and we can help you out

09/02/2024

Massive effort by the crew this week working in crazy hot conditions.

Another production bore completed, This one was for a strawberry grower in Carabooda.

80m 200mm bore drilled through tough lost circ conditions, Well done boys 💪

25/01/2024

We were approached by one of the biggest growers in the state to attempt to drill an inclined production bore on a 60° angle on there property in Cowalla , east of ledge point.

We put together a plan and gave it a crack. Angled mud rotary drilling through sandy formations isn't common practice and extremely difficult.

It took a few attempts to steer the bit on the right angle but we eventually managed to run the 200mm production casing down to 60m.

After a good 10hr air development the bore was test pumped at 19L/sec for 24hrs with only 10m drawn down.

Huge effort by the crew. Well done boys 💪

Address

Mindarie
Perth, WA
6030

Opening Hours

Monday	7am - 6pm
Tuesday	7am - 6pm
Wednesday	7am - 6pm
Thursday	7am - 6pm
Friday	7am - 6pm
Saturday	7am - 6pm

Telephone

+61400124550

Website

http://www.aquaattackdrilling.com.au/

Alerts

Be the first to know and let us send you an email when Aqua Attack Drilling posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Aqua Attack Drilling:

Want your business to be the top-listed Home Improvement Business in Perth?