Mckaskell Haindl

Directions Website

Mckaskell Haindl McKaskell Haindl designs and makes fine furniture, cabinets and accessories for homes and businesses with the amazing team at Covenant Construction

I don’t always get to see where the things I make end up. From my last post - hand-carved window moulding - critical mai...
2026-11-19

I don’t always get to see where the things I make end up. From my last post - hand-carved window moulding - critical maintenance for this beautiful old house. Installed, caulked, primed, ready for paint.

Super curious: if you saw the last post and you work on old houses - how do you usually replicate old trim? Heck, even if you don’t work on old houses, but had to make new trim that isn’t available - how would you do it?

Hard to believe but woodcarving, as a trade, isn’t all acanthus, sculpture and frilly things…sometimes it’s about remaki...
2026-11-17

Hard to believe but woodcarving, as a trade, isn’t all acanthus, sculpture and frilly things…sometimes it’s about remaking, by hand, ancient mouldings for restorations. In this case, the crew at BVR needed just seven feet of this exterior crown.

Do the math: how much to have new moulder or shaper knives made? How much to set up the machine and tune the run - for a single, short length, how much to wait for a trim retailer to make it? (oh, wait, most suppliers only sell what’s already available and this profile hasn’t been made in over a century!)

Sometimes it’s simply faster and easier to do it by hand.

This piece being so rotten was not part of the plan and it was turned around in just a couple days so the crew could keep moving. TEAMWORK!

And then there’s BIG veneer-work! A project from when the shop was on Brydges Street - not concert-hall-big, but big eno...
2026-11-08

And then there’s BIG veneer-work! A project from when the shop was on Brydges Street - not concert-hall-big, but big enough and curved enough to be a fun challenge in a small workshop

Just chatting with someone about veneer work over the years and thought posting might be a quicker way to share Frankly,...
2026-11-07

Just chatting with someone about veneer work over the years and thought posting might be a quicker way to share

Frankly, I am in awe of the stuff Samuel Forrest works on! Love the idea of attending a seminar 😎

INSTALLATION DAY! Beautiful blue sky and some cool new techniques - Tom Klassen and son, of Memorial Restoration & Safet...
2026-11-05

INSTALLATION DAY! Beautiful blue sky and some cool new techniques - Tom Klassen and son, of Memorial Restoration & Safety prepared the area by carefully removing the old marker from 1982, building and setting a form, pouring a new concrete key (what the trade calls the footing grave markers are set in/on), and providing two stainless steel channels to be attached to either side of the new marker. The channels hug the marker and allow air to flow underneath so that the bottom doesn’t stay wet and deteriorate, they are spiked into the wet concrete to act as an anchor.

They mixed the concrete in a tarp which was much easier, faster and cleaner than mixing in a wheelbarrow - I’ll be using this method again!

Once plumbed and braced and the wet key was troweled the new marker was wrapped in plastic to allow a slower cure for the concrete and protect it from rain while it cured.

Then I returned a few days later to remove the plastic, the concrete form, and to tidy things up and detail the marker.

Two finials for a contractor wrapping up a heritage restoration project in Bishop Hellmuth Heritage District. Thanks for...
2026-11-02

Two finials for a contractor wrapping up a heritage restoration project in Bishop Hellmuth Heritage District.

Thanks for the referral Birdseye Custom Woodwork - much appreciated!

In earlier posts we saw the new marker designed, the material secured, and the beginning of text layout on the slab. Now...
2026-11-01

In earlier posts we saw the new marker designed, the material secured, and the beginning of text layout on the slab. Now it’s about carving. An early lesson Siggi Bühler taught me years ago is to minimize tool changes (this is a manufacturing principle - same is true when working on a CNC machine or moving materials from one process to the next); so I chose to focus on the same cut on the same letters across the entire field as much as possible.

What’s this mean? Order of operations: part-out all the long straight letter parts first, then the curved parts of certain simple letters, then paring away the straight parts then moving to a variety of curved elements one specific letter at a time so as to use the same tool for as many cuts as possible (as in - I would use say the number 8 x 12mm gouge for one particular paring cut on as many ‘R’s as possible before switching tools to work on a different letter part. I saved serifs for last. The most complex letters were actually each worked on individually. And, to be fair, if a particular sentence was going well, or was nearly finished I would break from my work pattern just to keep things alive - discipline need not be ridged 😁

That said, with more than 175 characters made with a variety of idiosyncratic fonts, sizes and stroke angles - straight, forewords and backwards, I needed a system just to help me maintain focus!

THERE WAS ABSOLUTELY NO ROOM FOR ERROR ON THIS PROJECT!

Once everything was carved and detailed I painted the letters. The original letters were also painted and traces of that ancient black paint can still be seen if one looks close enough.

2026-10-30

Practising carving the word ‘SACRED’ on a scrap before committing to the real piece - no room for error! The light mallet work allows greater tool control - especially in this tough white oak.

2026-10-29

Address

20 Towerline Place
London, ON
N6E2T1

Alerts

Be the first to know and let us send you an email when Mckaskell Haindl posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby home improvement businesses