05/12/2024
Quick Steps:
1、 Insert the middle leg bolt washer into the mount and tighten with a hex key.
2、 Insert the short leg bolt washer, align the power cord position, and fasten.
3、 Attach the leg insert, align screws, and secure with a small hex key.
4、 Position the base and tighten screws.
5、Use a level to confirm the installation spot, mark the base shape and center points.
6、 Drill holes, insert drywall anchors, and tap them in.
7、Screw the wall fl**ge into the anchors and attach the warmer.
8、Secure all screws, plug in, and switch on.
✨ Enjoy warm, fresh towels with ease!
Welcome to contact us: 👇
📩Website:https://bergoto.com/