Cartonlab

Cartonlab Arquitectura efímera y ecodiseño de productos.

When you have 20 participants at the same event, the final hours of installation can easily turn into a race against the...
01/09/2026

When you have 20 participants at the same event, the final hours of installation can easily turn into a race against the clock 🕘

With a modular cardboard system, around 90% of the setup can be completed before the participants arrive. That leaves the team free to focus on what really makes the difference: installing graphics and banners, adjusting each space, handling last-minute requests and making sure every exhibitor is properly looked after ❤️.

For the 3rd World Congress of Age-Friendly Cities and Communities, held at the Kursaal in San Sebastián, we solved most of the infrastructure in advance with display panels, counters, tables, chairs, trees and different booth configurations. Everything came together as one coherent exhibition landscape.

And once the event was over, all the elements were dismantled, stored and prepared to be reused at future editions

CardboardDesign

Montar una expo no debería darte más trabajo del necesario.😅Nuestro panel Hunter A0 está pensado justo para eso: m***a, ...
24/08/2026

Montar una expo no debería darte más trabajo del necesario.😅
Nuestro panel Hunter A0 está pensado justo para eso: m***a, coloca tu gráfica y sigue con lo importante.
Se instala en 3 minutos,⌛ es ligero, resistente y desm***able. Cuando termina el evento, ocupa muy poco espacio y lo tienes listo para el siguiente.
👉Sólo lo encontrarás en nuestra tienda online.
-------
Setting up an exhibition shouldn’t be more work than necessary. Our Hunter A0 freestanding display is designed to make it easy: assemble it, add your graphic and get on with what matters.
It takes just 3 minutes to set up, and it’s lightweight, durable and easy to dismantle. When the event is over, it takes up very little space and is ready for the next one.
Available exclusively in our online store.

Muros curvos, ligeros, desm***ables y hechos íntegramente en cartón.Para esta expo hemos desarrollado un sistema constru...
13/08/2026

Muros curvos, ligeros, desm***ables y hechos íntegramente en cartón.

Para esta expo hemos desarrollado un sistema constructivo pensado para crear grandes superficies expositivas sin recurrir a estructuras pesadas y con un m***aje sencillo.

"Dos miradas sobre Carmen" forma parte del proyecto En Clave Escénica, con diseño expositivo de la Escuela Superior de Diseño de Madrid e instalada en el Teatro Auditorio de San Lorenzo de El Escorial.

Diseño, producción y m***aje realizados en tiempo récord: ⌛ apenas dos semanas.

La instalación sirve de soporte al trabajo desarrollado por alumnado de seis centros superiores de enseñanzas artísticas de la Comunidad de Madrid y fue diseñada para desm***arse, almacenarse y volver a instalarse en una futura ubicación.♻️

En el carrusel podéis ver cómo pasamos del sistema y las piezas de cartón al m***aje final.

How do you explain your software platform at a trade show in a way that people instantly understand?That was the challen...
09/07/2026

How do you explain your software platform at a trade show in a way that people instantly understand?
That was the challenge behind our latest project for at World of Coffee .
Cropster’s marketing team, led by Daria Novak,came with a clear and bold idea: turn the booth into a giant laptop 💻 and make the product interface part of the architecture.
Our role at Cartonlab was to help turn that vision into a real, functional space. We worked on the structural design, production and installation, developing a full-scale booth made entirely from cardboard, designed to be lightweight, robust and easy to assemble.
Really proud of the result 🙏 , and happy to help their team do something essential in any trade show: explain complex ideas more clearly.
Thanks to Cropster for trusting us once again, (We couldn’t resist borrowing a couple of photos from your post 😊) also, great work from Pablo García Mora and Diego Ávila Mula for bringing this project to life.

How do you represent an entire industry within a single stand?That was one of the challenges behind the Pet Essentials f...
04/06/2026

How do you represent an entire industry within a single stand?

That was one of the challenges behind the Pet Essentials from Spain stand, a project developed together with for , in Nuremberg (Germany).

A shared exhibition space where several companies needed their own visibility while still feeling part of a common identity.

Because at a trade fair with thousands of exhibitors, attracting attention is only part of the job. Visitors also need to quickly understand who you are and what you do.

Not every stand needs a custom design. Some need to be ready on time, assembled without depending on anyone, or rearrang...
23/04/2026

Not every stand needs a custom design. Some need to be ready on time, assembled without depending on anyone, or rearranged during the event itself.

For their participation in the Science Festival, The Abdus Salam International Centre for Theoretical Physics (ICTP) built their entire space using products from our shop.

Printed cubes, tables, stools, bleachers, panels, trees… Standard pieces, yes. But designed to be combined and adapted to each use.

The result was a stand that worked from the very first moment, designed to engage visitors, many of them children, and make the scientific content accessible.

No extra design time and no technical assembly, you can set it up yourself. And with room to customise graphics, messages and uses depending on the content.

A way to solve a stand when time is tight, the budget is limited, or you need to reuse it across different events.

In which case would you consider setting up a stand like this?

¿Te vienes a diseñar este fin de semana?Abrimos inscripciones al público general para participar en un taller diseñando ...
22/04/2026

¿Te vienes a diseñar este fin de semana?

Abrimos inscripciones al público general para participar en un taller diseñando y construyendo con materiales recuperados, el area de descanso de .

Si te interesa el diseño, el reciclaje o simplemente quieres vivir algo distinto, aún estás a tiempo. Este viernes y sábado por la mañana, en el Rastro Emaús Molina de Segura.

Link de inscripción en nuestra bio!

Diseñar con lo que ya existe cambia las reglas.Este viernes y sábado, 20 estudiantes de la  trabajarán con nosotrxs en u...
20/04/2026

Diseñar con lo que ya existe cambia las reglas.

Este viernes y sábado, 20 estudiantes de la trabajarán con nosotrxs en un reto real junto a : diseñar y construir una zona de descanso utilizando únicamente materiales recuperados del propio espacio.

Con el material condicionando las decisiones, equipos que cambian constantemente y un proceso donde las ideas pasan por muchas manos antes de convertirse en algo construible, pondremos en práctica el diseño circular, colaborativo y en tiempo real. Pensar, probar y hacer.

Y el sábado, todo lo que ocurra durante el taller se abre al público con una jornada de puertas abiertas en el Rastro Emaús de Molina de Segura.

Si te interesa aprender diseño de otra manera, más cerca de cómo se trabaja fuera, este taller es para ti.

→ Inscripciones en el link de la bio de

Dirección

Calle Abarán 10, Polígono Industrial La Polvorista
Molina De Segura
30500

Horario de Apertura

Lunes 09:00 - 17:00
Martes 09:00 - 17:00
Miércoles 09:00 - 17:00
Jueves 09:00 - 17:00
Viernes 09:00 - 17:00

Teléfono

601185446

Notificaciones

Sé el primero en enterarse y déjanos enviarle un correo electrónico cuando Cartonlab publique noticias y promociones. Su dirección de correo electrónico no se utilizará para ningún otro fin, y puede darse de baja en cualquier momento.

Atajos

Compartir