Thoresby Joinery

Thoresby Joinery Local family run joinery firm, ranging from big jobs to small, in all aspects of joinery & woodwork.

30/05/2026

We have been back at the local infant school this week enjoying the sun 😅
We removed the old rotten panels and posts. We then fitted new panels and concrete gravel board. The timber post was set wider to allow a bigger opening to help the bins through with the gate being made to fit.

The materials was supplied by WL Timber.

29/05/2026

Here, we added a beading detail to the entrance, landing and stairs. This has added a lovely cohesive detail through out. We can’t wait to see this decorated!

Here, underfloor heating and new herringbone floors were laid on the ground and first floor. This raised the floor heigh...
25/04/2026

Here, underfloor heating and new herringbone floors were laid on the ground and first floor. This raised the floor heights by 35mm, which upset the riser heights on the first and last tread on the stairs, making them uneven. First, I cut the nose of the original treads and then cut an 18mm mdf as a packing piece; then with 6mm plywood, I fit a face and new riser 5mm over the packer height. Another mdf tread was cut, routed to form a bullnosed edge that sat over the top raising every tread by 36mm. The stairs are now ready for painting and a runner to go up the centre.

This job has now been painted and it looks stunning! This was finished a few weeks ago. I built the media wall, hung new...
24/04/2026

This job has now been painted and it looks stunning! This was finished a few weeks ago. I built the media wall, hung new doors and built a custom size unit at the end of the hall way. The panelling was done by 👌

A small kitchen alteration allowed a standard oven to fit inside the kitchen unit that originally housed a smaller micro...
14/04/2026

A small kitchen alteration allowed a standard oven to fit inside the kitchen unit that originally housed a smaller microwave oven. The shelf and drawer were removed and the shelf was lowered. The drawer became redundant which allowed the front to be fitted as a facia panel, making this look like it’s always been this way.

While cutting up some mdf sheets up outside my workshop, I had the pleasure of my boy coming over to see me. May as well...
02/04/2026

While cutting up some mdf sheets up outside my workshop, I had the pleasure of my boy coming over to see me. May as well make use of him and teach him some basics 😂.

Address

99 Shelford Road, Radcliffe On Trent
Nottingham
NG121AU

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Website

Alerts

Be the first to know and let us send you an email when Thoresby Joinery posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category