27/11/2019
Easy steps to getting the perfect corner when applying vinyl.
1. Most important part is prep clean with isopropyl alcohol 70% (make sure edges and underneath is cleaned aswell)
2.lay the vinyl down quickly to avoid dirt and dust from getting underneath as this will affect the finish.
3.once the vinyl is layed go to the corner and heat it (make sure not to over heat and burn the memory of the vinyl)
4.now to create the corner, pull directly at the corner and imagine your pulling it to create a triangle this is the three point rule .
5.now the corners are done you may apply the sides down and tuck underneath this creates a seamless look
6.now with the blade run along the underneath using the edge of the drawer as a guide this gives a great finish
7.finally heat the entire peice ensuring there is no pull back of the film and this will also show if there is any air trapped underneath .
The last two pictures are from a different way of doing corners. The other way is creating a cut at the corner then butting together this is not seamless and will show a line but puts less stress on the film meaning it will last longer .