Buildrite Construction- in Aklan

Buildrite Construction- in Aklan Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Buildrite Construction- in Aklan, Home improvement, Kalibo.

Another roof deck was saved from a faulty flexible cementitious waterproofing system. In this project, the roof deck of ...
28/01/2026

Another roof deck was saved from a faulty flexible cementitious waterproofing system.

In this project, the roof deck of a residential house in Poblacion Ibajay, Aklan was suffering from leaks due to failed waterproofing. According to the owner, Den Sabilano, the flexible cementitious membrane caused them a lot of problems in the past as it required them to reapply a new layer after just several months due to frequent leaks. In the end, they finally had enough.

This is where we stepped in. We had to remove several layers of flexible cementitious waterproofing membrane before applying Flexicrete, Leak Plug, and a topping. Since it's a flexible cementitious waterproofing membrane, we required them to at least apply a topping to protect Flexicrete from UV.

Now, they rest assured that their roof deck waterproofing system will last for many years. Thank you, Mr. Den Sabilano, for trusting Buildrite!

SCAN ME... Your 2025 Chemical Solutions Guide
03/11/2025

SCAN ME...
Your 2025 Chemical Solutions Guide

BuildRite Waterproofing Solutions
14/09/2025

BuildRite Waterproofing Solutions

BuildRite BlockOut Flexor
26/05/2025

BuildRite BlockOut Flexor

BuildRite Smartbond Flex Hydro
26/05/2025

BuildRite Smartbond Flex Hydro

22/03/2025

BuildRite BlockOut Flexicrete

Putty Master VS Skimcoat
22/03/2025

Putty Master VS Skimcoat

A putty is for filling while skim coat is for smoothing.

A putty (masilya) is used for non-structural filling, leveling, patching, and repair jobs on wood, concrete, gypsum board, fiber cement, and fiber boards. It is usually applied to fill and repair surface imperfections and voids with a depth more than 4mm.

On the other hand, skim coats (thin plaster) are used for smoothing walls in preparation for paint. Skim coats can only be applied with a thickness of 4mm; applying more than this will result in cracking or powdery skim coat.

Buildrite Putty Master is a ready-to-use, multi-purpose joint filler and putty. It can be applied up to 5mm and reapplied to achieve a thicker finish. Putty Master can also be used for filling dents, holes, and knots on wood and similar substrates.

🛒 Shop Online:
Putty Master - https://bit.ly/2ML9YUV / https://bit.ly/3btyZkE
Skim Coat SF - https://bit.ly/3cWthay / https://bit.ly/2QrWHFX
☎️ Call Us: 0905 479 3992
📧 Email Us: [email protected]
🌐 Visit Our Website: http://www.magnaprime.com.ph/
📱 Join Our Viber: https://bit.ly/3gZGjXN

18/04/2024

Finishing for jointing dry wall.

Floortek Tarc of Buildrite
30/01/2024

Floortek Tarc of Buildrite

Tofil 802-Ready mix Skim Coat Paste Type
29/09/2023

Tofil 802-Ready mix Skim Coat Paste Type

Address

Kalibo
5600

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Telephone

+639070588429

Website

Alerts

Be the first to know and let us send you an email when Buildrite Construction- in Aklan posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share