Andre's Air & Heat

Andre's Air & Heat Air conditioning and heating service, repairs and replacements. Free estimates and guaranteed best pricing on all work. Estimates are always FREE.

Residential Air Conditioning and Heating Repairs, Replacements and New construction.

10/01/2024

Hello everyone. I have an unfortunate update on the new freon situation. We were told a few weeks ago that gas furnaces could be adapted to work with the new freon but they have since updated that too. Now the rule states that only furnaces with ECM (electronic control module) blowers are allowed to be adapted. All other must be changed out. This means if you have a perfectly good gas furnace that's maybe only 5 years old with 20+ years of life left in it you will still be forced to change it out if you wait and convert to the new R31/R454B equipment. Please take the time to determine how to beat proceed keeping in mind the new equipment is a eraging 25% more than R410 equipment and we are already running bout or R410 in some brands. If you have any questions please feel free to call and in will do my best to answer them! Ask for Danny Tutt 225-315-9855

09/10/2024

Ok folks we have a Hurricane coming directly towards us. Stay safe and keep this in mind. AC compressors are sealed so floods have to reach the electrical section of the unit usually 1.5 to 2 feet up before they affect anything. If the fan motor isn't submerged you can likely get away with just a new contactor and or capacitor so don't get pushed into a new unit just because it got wet. During the flood of 2016 I repaired a ton of fully submerged units with sealed motors and all they needed was contactors and capacitors. Some needed fan motors if they were older and not totally sealed. Many of those units are still running today.

Ok folks this has been on my mind for about a year but without proper information I didn't want to post about what's com...
08/19/2024

Ok folks this has been on my mind for about a year but without proper information I didn't want to post about what's coming in 2025.

Put simply the government is forcing a change in the type of freon our equipment uses which will affect everyone with older out of warranty equipment starting in early spring. Replacement freon for existing units will be available until at least 2035.

These are the known facts. The new freon R32 or R454B are mildly flammable and thus require specific safety measures not built into any existing equipment or anything we can install for the next several months. Simply put if your outdoor unit goes out and you opt for a new unit you next year when R410 units are gone you will be REQUIRED BY FEDERAL LAW to also change your indoor coils or air handler unit as well. As of this post we still don't know if this will carry over to gas furnaces as well. On top.of that due to increased expenses designing and developing this equipment we have been told there will be an increase of 30-40% in equipment cost which is of course passed on to y'all meaning a job cost increase of ($2000-$4000 on an average system change out) starting early next year when we run out of the R410 equipment. This also hits us on the servicing end as we are required to replace most of our expensive tools with those rated for a no spark capacity so service call rates will adjust up accordingly.

My recommendations are that you check your outdoor units age. If it's over 10 years old or out of any warranty coverage period you should consider beating the huge jump in cost this year. New equipment will come with a 10 year parts warranty so you will be covered all the way through the life of this new law. Freon and parts will still be available for these units for at least the next 10 years. Be proactive not reactive. Don't be fearful and don't rush to change out equipment but do know all of these facts and base your decision on your budget and your desire to either beat it or wait it out and hope your equipment will last well into this.

For my multiple property owners you have a much larger burden coming and there are no legal work arounds. Once the R410 equipment is gone you will be stuck with $8000+ change outs on small properties likely not pulling much more than $1000 a month. Keep this in mind when figuring your rental prices and also your rental maintenance costs. The only option y'all can consider is pre purchasing equipment through us and storing equipment in advance. We can legally install anything you already own but our suppliers cannot legally build or ship any R410 equipment after January 1 2025. We are already starting to experience shortages on some units in other markets around the countr.

Here is an example of cost savings now vs later. My mother had four nearly 10 year old systems and wished to go ahead and beat what coming. By changing out just her outdoor units as the indoor were fine, she saved $16000 in extra expenses of the increased cost of equipment and requiments to change the coils as well for next year.

If you have any questions please call or text me and I will gladly take the time to answer them as best I can.

Danny Tutt - Owner Andres AC 225-315-9855

***Very important update. We have just been told that gas furnaces can be adapted to work with the new freon son you won't have to change those at this time. The government could change their minds in the future but for now you're ok.***

07/10/2024

CUSTOMER: "How much will it cost to do this job?"
CONTRACTOR: "$2,800 Dollars."

CUSTOMER: "That's WAY too expensive for this job!!"
CONTRACTOR: "How much do YOU think it would cost?"

CUSTOMER: "No more than $800 Dollars - MAX!! It's a simple job!"
CONTRACTOR: "I can't prioritize my time for so little."

CUSTOMER: "People in your line of work are so greedy."
CONTRACTOR: "Sorry you feel that way. Why not do it yourself?"

CUSTOMER: "But... but... I don't know how to do any of this."
CONTRACTOR: "For $900 Dollars, I'll teach you EXACTLY how to get this job done. Then you can spend $800 to do the job and you'll still be saving $1,100 Dollars - PLUS... you'll get the knowledge and experience for the next time you want to do a job yourself."

CUSTOMER: "Deal!! Let's do it."
CONTRACTOR: To get started you'll need tools. So you'll have to buy a welder, a grinder, a chop saw, a drill press, a welding hood, gloves and a few other things."

CUSTOMER: "But I don't have all this equipment and I can't buy all of these for one job."
CONTRACTOR: "Well then for another $300 more I'll let you rent my tools... and you'll still be saving $800 Dollars."

CUSTOMER: "That's cutting into my savings. But I'll rent your tools."
CONTRACTOR: "Okay! I'll be back on Saturday and we can start."

CUSTOMER: "Wait. I can't on Saturday. I only have time today."
CONTRACTOR: "Sorry, I only give lessons on Saturday, because I have to prioritize my time and my tools have to be at other jobs with other customers all week long.

CUSTOMER: "Okay!! I'll sacrifice my family plans on Saturday."
CONTRACTOR: "Yeah... me too. Oh... and I forgot... to do your job yourself, you also have to pay for the materials. Everything is in high demand right now, so your best bet is to get your truck and load up at 6AM before everyone else gets there."

CUSTOMER: "SIX AM??? On a Saturday??? That's way to early for me. And also... I don't have a truck."
"CONTRACTOR: "I guess you'll have to rent one. Do you have a couple of strong men to help you load and unload everything?"

CUSTOMER: "Ummm... ya know... I've been thinking. It's probably best if YOU get this job done. I'd rather pay someone to get it done correctly than go through all the hassle.
CONTRACTOR: "Smart move, sign this and please get out of the way so I can work."

THE REALITY IS THIS...

When you pay for a job, especially handcrafted, you pay not only for the material used, but you are also paying for:

- Knowledge
- Experience
- Tools
- Services
- Time
- Punctuality
- Accountability
- Professionalism
- Accuracy
- Labor
- Sacrifices
- Safety and Security
- Payment of tax obligations

No one should denigrate a professional's work by judging prices - ESPECIALLY when they don't know all the elements or costs necessary for the production of such work.

This was just a remix of an old story I once heard and I am sharing this in support of craftsmen, specialists and entrepreneurs everywhere!

You can't haggle over a service that you don't actually have the skills or knowledge to do yourself. You can't get a high quality gourmet dinner party for the same price as a Happy Meal from McDonald's. And you can't be mad when skilled people actually KNOW their own worth.

Be smart. Trust a reputable professional. And never forget... that you ALWAYS get what you pay for.

05/07/2024

Hello customers and friends of Andre's Air & Heat There are some big changes coming in the HVAC industry next year that will effect everyone. A new refrigerant will begin being used and it's not compatible with existing systems. R454B will replace R410 and requires by federal law that the equipment match for compliancy and safety. If your system is older than 10 years consider changing it now while prices are 10-20% lower than whats coming in 2025. As always estimates are always free so give us a call and let's discuss your cooling and heating needs.

This is at 9am in your attic. Past 11am it’s 155 to 170 degrees and climbing. The shorter the attic space the hotter it ...
07/20/2023

This is at 9am in your attic. Past 11am it’s 155 to 170 degrees and climbing. The shorter the attic space the hotter it becomes and the faster the heat rise happens.

Please be nice to your HVAC techs. We literally risk boiling our brains to bring you comfort. This kind of heat will slow you down and by 4pm you can’t stay no longer than 5 mins at a time. It is very dangerous and takes your thoughts in seconds. We know it’s 90 plus outside and it feels like the AC is on outside to us. We change clothes 3 times a day at minimum to be professional for the next customer. Under our dry clothes we are soaked. We sleep at night with cramps and headaches no matter how much water we drink. Sometimes we get home at 10pm to 1am and have to be up at 6am and do it again. After 7 days it takes everything in you to go knock on that next door. There is no sitting down! There is no relaxing. It’s full blast and dangerous.

Being nice to us all is your advantage and ours. Watch after your HVAC man. We can get to hot trying to hard to bring your home below 85. We could spend the rest of our lives sitting in a wheelchair while being trapped inside our body and never speak another word nor be able to feed ourselves or anything. Heat exhaustion can happen in seconds so we have to take our time and if you see us standing outside soaking wet. We just reached the line of handicap!

Not many can do it. It takes a special mind set and education to achieve your comfort. Your kindness pushes us to be faster and more confident in fixing your issue. Motivation does nothing till you take action! That action in these attics are deadly.

We love bringing you comfort! To turn that AC on for you is what we chase. Once it’s running good we are scheduled to be at the next home in need. We have no idea how long it will take repair each house. Most of the time we are running behind everyday. That stress alone makes us stay in the attic to long trying to get to the next home on time.

Be nice to us, we are pushed passed the limits most people can’t handle.

Thank you in advance ❤️

Ashley Tutt
06/27/2023

Ashley Tutt

06/23/2023

Ah, the Good Ole Days

"The modern air conditioner was invented only in the 1920’s and it didn’t become a common home feature until the latter half of the 20th century. But, while some of us might wonder how our grandparents survived hot and steamy summers, the fact is those older homes had a few tricks up their sleeves. They were designed and built with features to help them stay cool without AC.

Airflow: In northern states, it was common to create a “stack effect” by opening windows in the basement and top floor. This generated a cool breeze through the house. Further south, before AC many homes were built on blocks, allowing breezes to flow underneath and help keep them cool all summer long.

Tall ceilings: Ceilings as high as 10, 12 and even 14 feet were common in older homes. As heat rose to the ceiling, lower areas stayed cool and comfortable. Ceiling fans—powered by electricity or elaborate rope systems—also facilitated air movement.

Transoms: A transom—a small window over a door—allowed warmer air at the ceiling to circulate up to higher floors, providing more air movement throughout the house. Transoms over exterior doors often had hinges and special hardware. This allowed easy access to open and close, helping create airflow while still providing security.

Large windows: Many older and historic homes had large, double-hung windows. Opening the top sash would allow hot air near the ceiling to escape. Opening the bottom sash, especially at night, allowed cool air to flow inside. Rooms had many windows, some as large as doors. Thick, long draperies were often used in these large windows to keep out the heat. People would “draw the drapes” to help keep a room cool without sacrificing light.

Porches: Wraparound porches offered shade from the direct sun while still allowing light to pour through windows. Screened and furnished sleeping porches were also very common. People would sleep outside to catch the cool breeze of the summer night without all the bugs. Many believed that fresh air had health benefits.

Reflective roofs: Many older homes had light-colored or silver-metal roofs made of lead, tin or copper. This was a great way to reflect heat away from the home to reduce interior temperatures. It’s quite a contrast to today’s dark asphalt shingles that can absorb a lot of the sun’s rays.

Thick walls: If you could afford them, thick brick masonry or stone walls were a great insulator and kept homes cool before AC. Walls 12 to 24 inches thick were common in the Deep South, blocking the heat from the inside as the day wore on, and providing some warmth as the evening chill set in."

Don't play around inside or around your outdoor AC units. There are numerous places for wasps to build nests and snakes ...
06/14/2023

Don't play around inside or around your outdoor AC units. There are numerous places for wasps to build nests and snakes to hide.

Don't over pay for equipment change outs. Give us a call and you can potentially save thousands of dollars.
06/12/2023

Don't over pay for equipment change outs. Give us a call and you can potentially save thousands of dollars.

05/13/2023

We recently signed on with Synchrony for our financing provider. There are several low interest plans and even interest free financing available. Heating and cooling equipment has skyrocketed in cost over the last 3 years with COVID shortages, government regulation changes and of course the out of control inflation rates. It's becoming increasingly difficult for customers to afford even expensive repairs. It doesn't cost you anything for a quote and seeing if you can be approved only takes a few minutes. Don't suffer, let us help you and your family enjoy the comfort of a quality system in your home at a monthly price that won't break your bank.

05/04/2023

Spring time which just means early summer is upon us. It's time to clean up your systems and get them in top shape before the real heat arrives. Don't get fooled by gimmicks. A low price spring cleaning usually leads to "finding" things to change in order to make up the loss. Stick with honesty and integrity. Support your local HVAC companies.

Remember ESTIMATES ARE ALWAYS FREE
and FINANCING IS AVAILABLE

Address

235 Marilyn Drive, Suite 15891
Baton Rouge, LA
70895

Opening Hours

Monday 7:30am - 5pm
Tuesday 7:30am - 5pm
Wednesday 7:30am - 5pm
Thursday 7:30am - 5pm
Friday 7:30am - 5pm

Alerts

Be the first to know and let us send you an email when Andre's Air & Heat posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Andre's Air & Heat:

Share