The Canadian Contractor LLC

11/05/2026

Well….somebody learned a new skill today and had it almost mastered in a few hours 😎😊 🍁

10/29/2026

Constructed a retaining wall with integrated solid steps (weighing in at 400 pounds each)….4” drain pipe running entire perimeter daylighting over the hill….backfilled and compacted….assembled a German made solid aluminum 15x20 greenhouse with skylights, Dutch doors, exhausts and shelving….best guess is 48-52 Tons of material went down the hill a wheelbarrow at a time…done 🍁 😎☺️

10/29/2026

Constructed a retaining wall with integrated solid steps (weighing in at 400 pounds each)….4” drain pipe running entire perimeter daylighting over the hill….backfilled and compacted….assembled a German made solid aluminum 15x20 greenhouse with skylights, Dutch doors, exhausts and shelving….best guess is 48-52 Tons of material went down the hill a wheelbarrow at a time…done 🍁 😎☺️

10/29/2026

10/29/2026

Before and after….constructed a retaining wall with integrated solid steps (weighing in at 400 pounds each)….4” drain pipe running entire perimeter daylighting over the hill….backfilled and compacted….assembled a German made solid aluminum 15x20 greenhouse with skylights, Dutch doors, exhausts and shelving….best guess is 48-52 Tons of material went down the hill a wheelbarrow at a time…done 🍁 😎☺️

10/07/2026

After and before…ripped out everything including the soffits…fixed everything the builder didn’t do at the beginning…rework the plumbing and ran new to match new fixtures…ran all new electrical to flat led lights and vanity light on dimmers…fixed the hvac and ran exhaust to exterior…insulation…drywall…concrete board…tile..grout…new Ariel sage green vanity with quartz top…new brushed gold fixtures..new door..trim and paint…done ✅😎 🍁

10/07/2026

After…before…during…protected everything…demoed all existing including removing the soffits over the vanity and shower…fixed the framing…ran all new plumbing…electrical…hvac…actually vented the exhaust van to the exterior…changed the lighting layout with canlights and vanity lights all on dimmers…insulation…drywall…concrete board…kerdi…custom pan…tile..grout…ariel vanity and linen cabinet…trim..and all the finishes…done ✅ 🍁 😎

08/22/2026

Removed old melamine wall system that was in place…took measurements and created drawings for client approval…fabricated two base cabinets with full extension drawers and two doors with shelf…a solid counter top…and two upper bookcase units with full adjustable solid wood shelving with aprons front and back to hold significant weight over a 49” span…installed…puttied sanded caulked…primed..painted…reassembled…Emtek k***s and pulls…done ✅😎🍁☺️

08/22/2026

This was a challenge…build a custom hall tree that goes from a corner to a radius wall…(that was also 1-7/8” out of level top to bottom)…made a template…custom fabricated the base and Hevea top….installed…made a second template to make the solid back panel to fit perfectly into the curve and match the out of level wall…installed…made a third template to fabricate the solid upper cabinet…installed…puttied…sanded…painted…stained…urethaned…installed finish hardware…done ✅🍁😎😊

08/22/2026

Fairly simple thing….homeowners took the gate from their previous home and asked to mount it across the laundry room to use as a dog 🐶 gate….fabricated a mounting block and block to mount latch system…hung and painted ready to keep Ruby locked up tight 🍁😎☺️