Matthew's Chainsaw Repair and Tree Removal Services

Matthew's Chainsaw Repair and Tree Removal Services Chainsaw repair and restoration shop. Minor or major rebuilds we do it all and we do it right!!

We are pleased to announce that our loader is now equipped with a cab, a culmination of a challenging yet rewarding proc...
07/12/2025

We are pleased to announce that our loader is now equipped with a cab, a culmination of a challenging yet rewarding process. From the initial concept to the final product, we are satisfied with the outcome, acknowledging that it may not be perfect but rather a testament to our dedication. Our objective was to create a fully metal cab, a feature not offered by MTD, and we successfully achieved this goal. Although it may not have a polished appearance, the cab is a result of numerous hours of hard work. We welcome your feedback and appreciate your continued support.

06/29/2025

Been busy on a project so haven't posted in a while. Later today we will be posting the project and pictures this afternoon. Wanted to wait till it was done but we've been working hard to get this thing done but keep the finished product something we were happy with.

Finally can post that we got power steering on the loader. Took a tractor that wasn't designed to have power steering an...
05/26/2025

Finally can post that we got power steering on the loader. Took a tractor that wasn't designed to have power steering and made it happen. Nobody online had ever put power steering on a White. But we got the parts gathered up, and after a bunch of broken parts it finally works. Rerouted all the hydraulics, new steering stem, fabricated a new drag link, new fuel tank and battery box. Share and keep helping us grow, thanks everybody!!

Finally getting around to making the 4 way power plow for the 140. Had to custom make the mount but it turned out pretty...
05/10/2025

Finally getting around to making the 4 way power plow for the 140. Had to custom make the mount but it turned out pretty nice. Just gotta weld the front cylinder bracket on and put the quick disconnect ends on. Definitely gonna be nice to have a hydraulic power plow sitting around.

Been pretty busy lately so forgot to post pictures of our 140. Got the HD air filter mounted and the weight bumper built...
04/25/2025

Been pretty busy lately so forgot to post pictures of our 140. Got the HD air filter mounted and the weight bumper built. Very happy with the way both projects turned out. And as always Ryker was safety supervisor on both projects🤣🧡🧡

Another project that's almost in the books. Gotta hook up the hydraulics and it'll be done. Definitely made a pretty nic...
03/24/2025

Another project that's almost in the books. Gotta hook up the hydraulics and it'll be done. Definitely made a pretty nice turn around. Ryker was happy so thats all that matters. Love ya little man🧡🧡

Got the v-twin in the John Deere 140 finally. Made a custom exhaust and put a stack on it. Gonna start gathering factory...
01/25/2025

Got the v-twin in the John Deere 140 finally. Made a custom exhaust and put a stack on it. Gonna start gathering factory options that John Deere offered and then it'll get a complete restoration. Gonna start looking for a power broom for the front and start making the mid mount grader blade. Definitely gonna be a work horse with the 18 hp vanguard, power steering, rear pto, and rear hydro quick disconnects, and 3 point lift. As always we appreciate all the likes and shares you guys give us.

Well we finished up the motor swap on the Ford so it was time to pull another test dummy into the laboratory. Experiment...
12/02/2024

Well we finished up the motor swap on the Ford so it was time to pull another test dummy into the laboratory. Experiment #140 is the most capable project we have. With the factory quick disconnects on the front we will definitely be looking for a 4 foot power broom. Already in the process of building a mid mount grader blade with power angle. So by the time it's done it'll be a v-twin powered beast. Thanks for all the likes and shares.

Well the Ford once again got pulled into the garage for a motor swap. The plan from day 1 was to find a Kohler 18 Magnum...
10/14/2024

Well the Ford once again got pulled into the garage for a motor swap. The plan from day 1 was to find a Kohler 18 Magnum to keep it original. Well we couldn't find 1 reasonably priced so it got the Briggs 18 HP v-twin. Well last week we found 1 and brought it home for $50. Got it put in and couldn't be happier with how it runs. Now it just needs the hood bolted back on and it'll be done. But hopefully before spring we are gonna make a mid-mount grader blade to put on it.

Well after a year of owning the loader it's finally coming together. The rims and tires we wanted in the front, the load...
09/25/2024

Well after a year of owning the loader it's finally coming together. The rims and tires we wanted in the front, the loader repainted, and now we have the hood in primer. It's turning out to be a nice little tractor. First picture was the day after we got it second picture was taken last Sunday. Now we got the John Deere 140 H3 getting ready to go into the garage.

We've been trying to upgrade our loader with wider front rims and tires for better stability. A friend had a set 2 inche...
08/26/2024

We've been trying to upgrade our loader with wider front rims and tires for better stability. A friend had a set 2 inches wider, which we bought and installed. They fit perfectly and improve the loader's stance. We'll order matching skid steer tires and add power steering next. If you know of garden tractor hard cabs for sale, please message us. We're looking to buy a cab before winter and install it on the loader. We'll pay $50 for leads that result in a purchase.

Well the desk is officially employee approved. It was definitely worth the hard work seeing Ryker so happy with the fini...
08/05/2024

Well the desk is officially employee approved. It was definitely worth the hard work seeing Ryker so happy with the finished product. It's something that I know he will have for years. Now it's time to start desk #2 but it's gonna be made with some black walnut from a past tree job we did.

Address

Dysart, PA

Telephone

+18146745113

Website

Alerts

Be the first to know and let us send you an email when Matthew's Chainsaw Repair and Tree Removal Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category