Fishers Garage Floors

Fishers Garage Floors Epoxy Flooring Contractor specializing in Polyaspartic Garage Floor Coatings. We also do epoxy floor

Finished up a 2 car garage today in Fishers. The homeowner, Brad, is moving in from Cincinnati and updating his home. ...
12/17/2025

Finished up a 2 car garage today in Fishers. The homeowner, Brad, is moving in from Cincinnati and updating his home. Insulating and heating the garage, removing some walls on the interior, new paint, flooring, etc. We may even help with some of that since it's winter and we like Brad. For now, we'll just enjoy his new garage.

www.fishersgaragefloors.com

Finished up the Epoxy/Polyaspartic Garage Floor coating for Vince and Ashley here in Fishers. Hope it will welcome them...
12/06/2025

Finished up the Epoxy/Polyaspartic Garage Floor coating for Vince and Ashley here in Fishers. Hope it will welcome them home for a good long time and give their kids a clean safe place to play.

We are doing floors all winter. Get on the schedule now.

www.fishersgaragefloors.com

This is how we finished the day. The floor was completely, 100% grounded and then shotblasted. The shotblaster remove...
12/04/2025

This is how we finished the day. The floor was completely, 100% grounded and then shotblasted. The shotblaster removes the dust in the slab and profiles the floor.

We applied a coat of moisture v***r barrier (MVB) epoxy for the basecoat and then left for the night to let it dry. Allowing the MVB to dry without flake in it gives us the maximum spec for the MVB. Of course, all MVB's require shotblasting.

A new Epoxy Garage FloorWe are working in Fishers today prepping and putting down a moisture v***r barrier (MVB) epoxy b...
12/03/2025

A new Epoxy Garage Floor

We are working in Fishers today prepping and putting down a moisture v***r barrier (MVB) epoxy basecoat. It's 22 degrees. The overhead doors will completely close when we're done today and we'll be using a heater to make sure the epoxy cures.

We use the best products and the best preparation and install techniques for the longest lasting floor ever.

We are still booking for this winter. Looking for garages, basements, or commercial. Free estimates. Get 2025 pricing.

Get a new, clean, beautiful garage floor before Christmas. 317-588-8550.

www fishersgaragefloors.com

Finished a 2 car garage floor in Noblesville today. Wombat flake color. Ground and shot blasted to achieve a CSP3 prof...
11/07/2025

Finished a 2 car garage floor in Noblesville today. Wombat flake color.

Ground and shot blasted to achieve a CSP3 profile. Moisture V***r Barrier epoxy base coat with 25 psi hydrostatic pressure specs. Let dry overnight. Applied the flake and polyaspartic topcoat today to finish it up.

www.fishersgaragefloors.com

Finished the garage in Flat Fork in Fishers using Orbit flake. Just went back today to finish the black paint on the st...
11/06/2025

Finished the garage in Flat Fork in Fishers using Orbit flake. Just went back today to finish the black paint on the step risers. What a great couple to work for. They're moving their contents back in today.

www.fishersgaragefloors.com

Yesterday, we prepped this garage by grinding and shotblasting and then applied a moisture v***r barrier epoxy. It drie...
11/05/2025

Yesterday, we prepped this garage by grinding and shotblasting and then applied a moisture v***r barrier epoxy. It dried overnight and now, we'll flake it and top coat it.

Starting a garage in Flat Fork today with grinding followed by shot blasting to prep the floor. Shot blasting removes a...
11/04/2025

Starting a garage in Flat Fork today with grinding followed by shot blasting to prep the floor. Shot blasting removes all of the dust that the grinder pushes down into the pores of the concrete and it profiles the concrete to a CSP3 level, required by the Moisture V***r Barrier (MVB) manufacturers to withstand up to 25 psi hydrostatic pressure. Of course, most every epoxy floor contractor only grinds plus they flake into it to save time, which further reduces what it will withstand. So they tell you they're using an MVB but in reality, it can only withstand 5-7 psi.

We grind + shotblast AND we do NOT flake into it. We are only of the only contractors in Indianapolis that maintain the 25 psi spec on MVB base coats.

Get the Best quality. Quit falling for the polyurea gaslighting or even the epoxy guys that cut corners. Call us today!

Finished up this 3 car garage at Geist today. Forgot to get final pics with the doors open, but got these. Greg and Be...
06/27/2025

Finished up this 3 car garage at Geist today. Forgot to get final pics with the doors open, but got these.

Greg and Beth were great to work with.

Had to remove some 20 year old epoxy that was supposed to be light gray but had faded pretty bad, kind of green, and had stated to come up in spots. But it was a bear to grind off. We ground the floor AND shot blasted it to get a rough CSP 4 concrete surface profile.

Put down a new Moisture V***r Barrier (MVB) Epoxy basecoat last night to dry overnight. We never flake into the base cost. Then today, we put down a coat of polyaspartic with Gravel color flake and finally topcoated it with clear polyaspartic.

Polyaspartic is UV stable so it never yellows and never peels up from hot tire pickup up.

97 degree says. It was hot.

www.fishersgaragefloors.com

We trim around water heaters, pipes, furnaces, laundry sinks, etc. in order to finish the floor. Some customers tell us...
11/27/2024

We trim around water heaters, pipes, furnaces, laundry sinks, etc. in order to finish the floor. Some customers tell us to just make a straight line in front of it and omit that area, but doing the whole floor complete looks so much better.

www.fishersgaragefloors.com

Polyaspartic kitchen floor. Most of the time, we're using epoxy to get a metallic look. We recently did this kitchen f...
11/26/2024

Polyaspartic kitchen floor. Most of the time, we're using epoxy to get a metallic look. We recently did this kitchen floor in a rental property. Previously, it was sheet vinyl that water had started to get under and discolor. Plus, tenants had poked holes in it. With a seamless floor, it's seamless and water resistant. Nothing really sticks to it and it's super easy to clean. And it can be updated by sanding and applying another coat. Polyaspartic doesn't yellow in sunlight like epoxy and it's harder and more scratch resistant.

While we were there, we did the entry also.

www.fishersgaragefloors.com

This is the 2nd house that Rick & Angie had us coat. We agreed to do this garage and the carriage house garage separate...
11/26/2024

This is the 2nd house that Rick & Angie had us coat. We agreed to do this garage and the carriage house garage separately, one week apart, so they wouldn't have to store their contents outside.

Full grind. Shot blast. Full base coat without flake. 2nd flake coat and top coat. 2 day process. Not about speed. It's about quality...always.

www.fishersgaragefloors.com

Address

14131 Cliffwood Place
Fishers, IN
46038

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm

Telephone

+13175888550

Website

Alerts

Be the first to know and let us send you an email when Fishers Garage Floors posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Fishers Garage Floors:

Shortcuts

Share

Category