Matt's 307 Paint and Finishes LLC

02/24/2025

New construction is always nice when I get to be the first to make those nice crisp lines. We primed everything, then sprayed two coats of paint on ceilings then hand cut and rolled walls on this 10000 sqft of drywall. Now it's turned back to the contractor to do floors cabinets and doors and trim. Then we will return to do finish coat.

02/23/2025

So I was tasked with making this new pine t&g look like blue pine. Client had insurance claim for water damage so they only removed and replaced what was damaged. To get blue pine would have been special order of a set amount which was way more than covered by insurance. So I mimicked the blue pine with free handing stain. Then used the Amber Shellac top coat like the rest of the room. Turned out quite nice and saved client money.

10/12/2024

Sometimes it's not just maintenance coats it's a full transformation we get to do. Before and after pictures

09/08/2024

Another deck we brought back to life. This one had concave boards and very heavy previous stain then spots that completely failed. So to even things out I went with a semi solid stain that still shows wood grain but covers the inconsistency.

08/05/2024

Some before and after of power wash then sand and stain of a redwood deck.

06/24/2023

Always nice getting crisp straight lines when changing colors. Makes for clean looks and good contrast

04/30/2023

A little more refinishing of gel stain fiberglass doors. These had weathered for over ten years now looking brand new

04/02/2023

Some before and afters of stripping, repairing and refinishing this 100+ year old desk. Was very interesting dealing with that old of a finish and trying to get rid of as many of the knicks and dings and scratches as it has accrued over the years.

03/06/2023

Some before and after of these cabinets I refinished. They are 50 years old and made out of birch plywood. Lots of years of grease and extra layers of finish had to come off. Brought them back to natural finish. Had to be very careful not sanding through the veneer but still strip it down. Turned out very nice and clean. Happy customers!

02/09/2023

So this client was tired of the dark ceiling and wanted to brighten up their kitchen and dining room a bit. Hand brushed and rolled this t&g to a cream color. Looks pretty sharp now.

01/22/2023

This was was a bit challenging but got it finished with nice crispy lines. Walls are SW kilim beige satin and trim and doors are a custom color in. SW pro industrial urethane enamel semi gloss. Turned out very nice with the contrast of colors.

12/15/2022