Sawmills Hardware

Directions Website Contact the business

Sawmills Hardware Locally Owned & Operated Hardware Store

11/13/2026
11/13/2026

ancestral resourcefulness opposed to contemporary consumption escalation

1. grandmother utilized singular outer garments over extended epochs; modern consumers procure auxiliary textiles due to stylistic expiration.

2. grandmother synthesized sustenance from pre-existing pantry inventories; modern populations identify zero provisions amidst packed cooling machinery.

3. grandmother repurposed glass vessels; modern citizens purchase storage organizers solely to configure storage organizers.

11/13/2026

Master Reading a Measuring Tape in Seconds! 📏🔨

Ever caught yourself double-checking a measurement or wondering what all those tiny lines between the numbers actually mean? Whether you are diving into your very first DIY home improvement project, building custom furniture, or taking on professional woodworking, knowing how to read a tape measure in inches is an essential skill everyone should master!

Breaking Down the Inch: Fractional Measurements Explained

Reading fractional inches doesn’t have to be confusing. Here is a quick reference guide to help you read tape measure lines with complete confidence:

• 1/16 Inch: The smallest common graduation lines on a standard tape measure. Count 16 increments for every full inch!
• 1/8 Inch: The slightly longer lines that divide each inch into eight equal parts (1/8, 3/8, 5/8, 7/8).
• 1/4 Inch: Prominent quarter-inch markings (1/4, 3/4) that help you quickly gauge medium lengths.
• 1/2 Inch: The second-longest line in the center of every inch mark, dividing the inch right in half.
• 1 Whole Inch: The longest line accompanied by bold numbers!

3 Pro Tips for Accurate Measuring Every Time:

1. Understand the Floating Hook: That metal end hook on your tape measure moves slightly on purpose! It automatically compensates for its own thickness whether you are pulling against an outside edge or pushing against an inside wall.
2. Burn an Inch for Precision: For hyper-accurate woodworking cuts, start measuring from the 1-inch mark instead of the tape’s metal hook (just remember to subtract 1 inch from your final measurement!).
3. Measure Twice, Cut Once: Always double-check your fractional marks before marking your wood or material to save time, money, and costly mistakes.

📌 Save this post to keep this handy measurement chart nearby for your next project!
💬 Drop a comment below: What DIY project or home renovation are you working on right now?
📲 Tag a friend or share this guide with someone who could use a quick measurement refresher!

11/13/2026

Types of putty knives & their uses:

Putty knives are hand tools used in construction, painting, drywall installation, surface preparation, and repair work. They are designed for applying, spreading, smoothing, scraping, and removing materials such as putty, joint compound, fillers, adhesives, and paint. Different blade shapes, widths, and flexibility levels make them suitable for specific applications.

1. 🔧 Flexible Putty Knife:
Uses: Used for applying and spreading putty, fillers, and joint compounds smoothly over walls, ceilings, and other surfaces.

2. 🛠️ Stiff Putty Knife:
Uses: Used for removing hardened paint, old adhesives, stubborn fillers, and other tough materials from surfaces.

3. 📏 Taping Knife:
Uses: Used for spreading drywall joint compound over seams, embedding joint tape, and producing smooth wall finishes.

4. ⚙️ Joint Knife:
Uses: Used for applying joint compound, filling small cracks, repairing drywall joints, and smoothing surface imperfections.

5. 📐 Corner Putty Knife:
Uses: Used for applying and smoothing joint compound on internal and external corners during drywall finishing.

6. 🔩 Offset Putty Knife:
Uses: Used for reaching difficult areas, applying fillers around obstacles, and working in recessed or confined spaces.

7. 🧱 Notched Putty Knife:
Uses: Used for spreading adhesives, fillers, and other materials in controlled patterns where a specific application thickness is required.

8. 🔄 Multi-Purpose Knife:
Uses: Used for spreading compounds, scraping surfaces, removing loose materials, and performing general repair and maintenance tasks.

9. 🪛 Scraper Knife:
Uses: Used for removing paint, wallpaper residue, adhesives, and other unwanted surface deposits.

10. 📏 Wide Putty Knife:
Uses: Used for covering larger surface areas, applying broad layers of filler, and smoothing compound over walls and panels.

11. 🔧 Narrow Putty Knife:
Uses: Used for filling small cracks, repairing minor surface defects, and applying materials in narrow or restricted areas.

12. 🟡 Plastic Putty Knife:
Uses: Used for applying soft fillers and scraping delicate surfaces where metal blades may cause scratches or damage.

Important selection factors:

🔹 Blade width and shape
🔹 Blade flexibility and stiffness
🔹 Blade material and thickness
🔹 Handle grip and ergonomics
🔹 Type of filler or compound
🔹 Surface material and condition
🔹 Application area and accessibility

Engineering takeaway:

Choosing the correct putty knife improves surface preparation, application quality, finishing accuracy, and work efficiency. Flexible blades are suitable for smooth spreading, while stiff blades are better for scraping and removing stubborn materials.

Which type of putty knife do you use most frequently in your workshop or construction work? Share your experience in the comments! 👇

11/13/2026

🚨 Don’t Pay $300 to Fix a Leaking Toilet! Here’s How to Replace a Toilet Wax Ring Like a Pro 🛠️🚽

Notice water pooling around the base of your toilet? Or maybe you're getting a faint, unpleasant sewer gas smell in your bathroom? That means your toilet wax ring seal is officially blown, and it’s time to fix it before water damages your subfloor!

Replacing a wax ring is one of the most essential DIY plumbing skills every homeowner and handyman should know. It looks intimidating, but with the right steps, you can swap it out in under an hour for less than $10 in materials.

Here is your ultimate step-by-step toilet wax ring replacement guide:

🧰 Tools & Materials You’ll Need:
New wax ring (preferably with a rubber fl**ge/sleeve)

New closet bolts (T-bolts) & washers

Putty knife or scraper

Adjustable wrench / socket set

Old towels & rags

Sponge & bucket (or wet/dry vac)

Cardboard (to set the porcelain toilet on)

📋 Step-by-Step Instructions:
Step 1: Shut Off the Water supply 💧
Locate the shut-off valve behind the toilet. Turn it clockwise until it stops completely to cut off the water supply.

Step 2: Drain & Empty the Toilet Completely 🪠
Flush the toilet and hold the handle down to drain as much water as possible from the tank and bowl. Sponge out or shop-vac all remaining water from both the tank and the bowl so it won't splash when you lift it.

Step 3: Disconnect & Remove the Toilet 🛏️
Disconnect the flexible water supply line from the fill valve. Pop off the plastic caps at the base of the toilet and loosen the mounting nuts using an adjustable wrench. Carefully lift the toilet straight up (get a buddy to help—porcelain is heavy!) and set it down sideways on a piece of cardboard to protect your floor.

Step 4: Scrape Off the Old Wax Ring 🧹
Using a putty knife or scraper, thoroughly clean off all the old, sticky wax from both the underside of the toilet base and the floor fl**ge. Wipe the surface clean with a disposable rag.

Step 5: Inspect the Closet Fl**ge 🔍
Check your closet fl**ge for cracks, corrosion, or structural damage. Rule of thumb: The fl**ge must sit about 1/4" above the finished floor line. If it’s broken or flush with the floor, install a fl**ge repair ring or extender before proceeding!

Step 6: Install the New Wax Ring ⭕
Place the new wax ring centered directly onto the floor fl**ge (or set it onto the bottom horn of the toilet). Ensure your new T-bolts are positioned straight up in the fl**ge slots. Carefully lower the toilet straight down onto the closet bolts—do NOT rock or twist the toilet once the wax touches the fl**ge!

Step 7: Secure, Reconnect & Test for Leaks 🔧
Press down firmly on the center of the toilet bowl to compress the wax ring evenly. Hand-tighten the washers and nuts onto the closet bolts, then snug them gently with your wrench. CRITICAL WARNING: Do not overtighten the nuts, or you WILL crack the porcelain base! Reconnect your water supply line, turn the water valve counter-clockwise, let the tank fill, flush multiple times, and inspect the base thoroughly for leaks.

⚠️ PRO HANDYMAN TIP:NEVER STACK WAX RINGS! Stacking two wax rings creates a weak point prone to catastrophic failure. If your floor was raised after installing new tile, use a fl**ge extender kit or an extra-thick wax ring instead.

💬 Have you ever tackled toilet plumbing yourself, or do you always call a pro? Let us know in the comments below! Don't forget to SAVE this post for your next home improvement project! 👇

11/13/2026

WD 40 tips 💙📝🏆

11/13/2026

Stop Leaks Before They Start: How to Use a Caulk Gun Like a Pro! 🛠️💧

Tired of messy, uneven silicone lines that peel off and let water seep in? Whether you’re sealing a bathtub, fixing kitchen sink gaps, or waterproofing window trim, getting that clean, watertight professional finish comes down to technique—not luck.

Most DIYers struggle with caulk because they skip crucial prep steps. Ready to do it right the first time? Follow this step-by-step master guide to achieve a flawless, pro-level bead every single time:

01 REMOVE OLD CAULK: Never layer new caulk over old, moldy material. Use a dedicated caulk removal tool or scraper to strip away every trace of the old silicone down to the bare surface. A clean slate is essential for proper adhesion.

02 CLEAN THE SURFACE: Wipe down the joint thoroughly using rubbing alcohol or a specialized cleaner. Let it dry completely. Any lingering soap scum, grease, or dust will prevent the caulk from sealing properly.

03 CUT THE NOZZLE: Slice the plastic nozzle tip at a sharp 45-degree angle. Pro tip: Cut closer to the tip for a thin bead (great for small gaps) or further up for a thicker bead.

04 PUNCTURE THE SEAL: Break the inner foil seal. Many standard caulk guns feature a built-in seal-puncture wire tucked into the frame, or you can use a long nail to pierce it cleanly.

05 LOAD THE GUN: Insert the caulk tube securely into the metal frame of the caulk gun. Squeeze the trigger a few times until the plunger rod engages and firmly holds the base of the tube in place.

06 APPLY A STEADY BEAD: Hold the gun at a consistent 45-degree angle to the joint. Squeeze the trigger smoothly while moving the gun at a steady, even pace. Avoid stopping mid-way to prevent blobs.

07 SMOOTH & FINISH: Right after applying, run a silicone finishing tool or a gloved finger lightly along the bead to press the material into the gap and create a clean, concave, watertight seal.

💡 PRO TIP: Always match your caulk type to the location (use 100% silicone for wet areas like tubs and showers, and paintable acrylic latex for interior trim). Always allow the full manufacturer-recommended cure time (usually 24 hours) before exposing it to water!

👇 Have you ever had a caulk job turn into a total disaster? Drop your DIY questions below, and let’s get it fixed!

Great Christmas gift  (Melody)  I have one and I love it.
11/12/2026

Great Christmas gift (Melody) I have one and I love it.

Save $30 on Any AS System Set

Address

3969 US Highway 321A
Hudson, NC
28638

Opening Hours

Monday 7am - 5:30pm
Tuesday 7am - 5:30pm
Wednesday 7am - 5:30pm
Thursday 7am - 5:30pm
Friday 7am - 5:30pm
Saturday 7am - 4pm

Alerts

Be the first to know and let us send you an email when Sawmills Hardware posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Sawmills Hardware:

Shortcuts

Share

Nearby home improvement businesses