Chill Out Radiant Heat

Chill Out Radiant Heat Energy-efficient electric radiant floor heat—easy to install, cost-saving comfort for any project
(1)

06/04/2026

Most people think heated floors are the luxury upgrade.

They're wrong.

The real luxury?

A heated shower bench.

Imagine stepping into your shower on a cold winter morning and sitting down on warm tile instead of an ice-cold slab of stone.

That's exactly what Chill Out Radiant Heat makes possible.

Our ultra-thin low-voltage heating system works great on shower benches.

It's one of those features guests never expect...
But never forget.

Would you add a heated bench to your bathroom?

06/04/2026

If you're planning a remodel, new build, or flooring upgrade, stop scrolling for 40 seconds.

This is Chill Out Radiant Heat, and it might be the easiest, most affordable way to add heated floors to your home.

Designed for simplicity, our ultra-thin low-voltage heating mat installs quickly and easily, helping homeowners and contractors save valuable time on every project.

You can cut it with scissors, fasten it in place, and install tile, LVP, engineered wood, and more directly over it.

The secret is our advanced carbon polymer technology. It's self-regulating, extremely durable, energy efficient, and designed to provide years of reliable comfort with virtually no maintenance.

Most homeowners assume heated floors are only for luxury homes or massive renovation budgets.

The truth is, heated floors have traditionally been expensive because the systems themselves were complicated. More components. More labor. More materials. More cost.

We decided to challenge that.

Our goal was simple: create a heated floor system that was easier to install, more affordable to own, and practical enough for everyday homeowners—not just high-end custom homes.

The result is a low-voltage heating system that's thin, durable, energy efficient, and remarkably straightforward to install.

Whether you're remodeling a bathroom, upgrading a kitchen, finishing a basement, building an addition, or constructing a brand-new home, heated floors may be far more attainable than you think.

And once you've experienced stepping onto a warm floor on a cold morning, it's hard to imagine going back.

Thousands of square feet have already been installed across North America, helping homeowners add comfort without the complexity and cost often associated with traditional heated floor systems.

Want to see what it would cost for your project?

Send us your floorplan and we'll create a custom layout, provide a quote, and answer any questions you have.

Click below to receive your FREE quote and FREE sample today.





  

Chilloutradiantheat.com

05/14/2026

Check out the easiest heated floor install ever.
This is Chill Out Radiant Heat — a low-voltage radiant floor heating system that’s making heated floors easier, faster, and more affordable than ever.

Installation is incredibly simple — just roll it out, cut it to length with scissors, and amazingly, you can nail the element directly to the subfloor without damaging it.

The carbon PTC material is self-regulating, automatically adjusting its heat output to maintain a consistent floor temperature while using energy as efficiently as possible.

You can pair it with a thermostat, or keep it simple with a basic on/off switch. Turn it on in the winter, off in the summer — it’s that easy.

The ultra-thin design won’t affect floor height, and no expensive specialty underlayment is required.

Once the system is installed, you can install your finished floor directly over top. Tile, LVP, engineered wood, vinyl plank, and more.

And if you prefer to use a decoupling membrane, underlayment, or cement board, those can all go right over the Chill Out system as well.

Perfect for bathroom remodels, kitchens, basements, new builds, additions, and whole-home radiant floor heating projects.

Send us your floorplan today and we’ll map it out, answer questions, and provide a custom quote.

Chilloutradiantheat.com

05/06/2026

This low-voltage carbon polymer system is quickly becoming one of the easiest and most affordable ways to add heated floors to a custom home.

The element rolls out fast, cuts easily with scissors, and is durable enough to nail through during installation.

No bulky systems. No expensive underlayment. No complicated install process.

Perfect for bathrooms, kitchens, entire homes, and modern beach houses like this one.

Planning a remodel or new build? Send us your floorplan and we’ll map out your heated floor system and provide a free quote.

Chilloutradiantheat.com

04/24/2026

If you’re planning a remodel or new build, this is the easiest way to add heated floors—Chill Out Radiant Heat.
Our low-voltage carbon polymer radiant floor heating system installs directly over plywood or concrete with no expensive underlayment, no complicated wiring, and no floor sensors. Just roll it out, cut it to fit, and install your finished flooring right on top.

Perfect for bathrooms, kitchens, basements, and whole-home projects, Chill Out delivers consistent warmth while covering up to 80% of your floor area—giving you efficient, comfortable heated floors without the high cost of traditional systems.

Works under LVP, tile, engineered wood, and more with ultra-thin mats that won’t raise your floor height.

If you want heated floors that are faster to install, more affordable, and built for modern homes, this is it.

👉 Send us your floorplan today for a custom layout + quote

Chilloutradiantheat.com

04/22/2026

If you’re planning a remodel or new build… you need to see this.
This is Chill Out Radiant Heat—and it’s taking the home improvement world by storm.

Once you see it, it just makes sense—it’s the easiest and most affordable way to add heated floors to any project.

This is a low-voltage carbon polymer heating mat that rolls out right onto your subfloor. It works on plywood or concrete—and the install couldn’t be simpler.

Just roll it out, cut it with scissors, and make your connections. You can even nail right through it without damaging it.

Once it’s down, you’re ready to install any hard flooring right on top. It’s ultra-thin, so it won’t affect your floor height or your LVP install.

It covers nearly your entire floor, allowing it to run at a lower, more efficient temperature than traditional systems.

Same warm floors—just a simpler install, for less money.

If you’re already doing the floor… there’s no reason not to do this.

Send us your floorplan today—we’ll map it out, get you a quote, and answer any questions you have.

04/16/2026

If you’re remodeling and NOT doing this… you’re gonna regret it. Chill Out Radiant Heat is changing the way people heat their floors. It’s a low-voltage system that’s ultra-thin, extremely fast to install, and built to keep things simple. You can literally cut it with scissors, lay it down, and connect it—without all the extra steps traditional systems require. No required underlayment. No floor sensors. Just a clean, straightforward install that saves you time. And it doesn’t break the bank either, Chill Out is way more affordable than traditional floor heating systems. If you’re planning a project, this is one of the easiest upgrades you can make. Visit our website to learn more—and send us your floorplan today. We’ll show you how simple it is to add Chill Out to your build.

Chilloutradiantheat.com





04/15/2026

If you’re remodeling and NOT doing this… you’re gonna regret it. Chill Out Radiant Heat is changing the way people heat their floors. It’s a low-voltage system that’s ultra-thin, extremely fast to install, and built to keep things simple. You can literally cut it with scissors, lay it down, and connect it—without all the extra steps traditional systems require. No required underlayment. No floor sensors. Just a clean, straightforward install that saves you time. And it doesn’t break the bank either, Chill Out is way more affordable than traditional floor heating systems. If you’re planning a project, this is one of the easiest upgrades you can make. Visit our website to learn more—and send us your floorplan today. We’ll show you how simple it is to add Chill Out to your build.

Chilloutradiantheat.com

04/09/2026

Everyone who comes across Chill Out says the same thing— "this looks amazing! … but I’ve got a few questions." So let’s run through a few of them real quick.

Can I use Chill Out under Vinyl or SPC?

Yes absolutely— you can use Chill Out under LVT, LVP, SPC, laminate, engineered wood, and tile. It stays well below the maximum temperature of 90 degrees so its safe under all types of flooring. It’s less than 1/8th of an inch thick and won’t cause any issues under your composite flooring. Just put the element down and install the flooring like you normally would.

What about concrete? Can I put Chill Out on a concrete subfloor?

Yes — it can also be installed over concrete. Just put the system on the concrete and install your flooring right on top. You can secure it to the concrete with tape or concrete nails and if you want to use a self-leveler on top of the Chill Out that’s totally fine as well.

Do you need a thermostat?

Not necessarily. The system is self-regulating, so a thermostat is optional depending on how you want to control it. Bathrooms and smaller areas we recommend not using a thermostat. Just use a simple on off switch to control the system.

How do I get a price, and where do I buy it?

The easiest way is to send us your floorplan or even a rough sketch with measurements. We’ll map it out for you and give you pricing based on your space.

Can I buy it direct from you?

Yes, you can buy direct from us and we ship from New Jersey to the US and Canada.

Can you nail into the product? Won’t that damage it?

Yes — one of the big advantages of this system is that the element can be fastened with nails to the subfloor. It also means you can nail wood flooring right through it without damaging it.

How thick is it?

It’s very thin — less than one eighth of an inch — so it doesn’t change your flooring heights.

Is the mat AC or DC?

Its both! Chill Out runs on 24 to 28 volt AC or DC

What is the pricing?

Pricing depends on the size of the area and what components are needed, so pricing can vary from project to project. Pricing is generally between $7.50 to $9 per square foot depending on the size of the area.

Thinking about heated floors under LVP? Here’s what you need to know.Most radiant floor heating systems run too hot and ...
04/09/2026

Thinking about heated floors under LVP? Here’s what you need to know.

Most radiant floor heating systems run too hot and create uneven heat, which makes them risky for vinyl plank flooring. That’s why many LVP manufacturers recommend staying under 90°F.

So you’re usually stuck choosing between two bad options: risk damaging your floor… or barely feel any heat at all.

Chill Out Radiant Heat is different.

Our low voltage carbon polymer system is self-regulating and designed to run at a safe temperature of 83°F, making it ideal for use under LVP, LVT, SPC, and laminate flooring.

Because the system covers up to 80% of your floor, you get consistent warmth without needing high heat. No wires or tubes. No complicated install. No overheating.

Chill Out is the ONLY option under vinyl.

If you’re planning a remodel or new build and want heated floors under LVP, send us your floorplan and we’ll map out exactly what you need.

Chilloutradiantheat.com

Address

15 Diane Drive
Marlboro, NJ
07751

Telephone

+17328516265

Website

Alerts

Be the first to know and let us send you an email when Chill Out Radiant Heat posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Chill Out Radiant Heat:

Shortcuts

Share

Category