Lee’s Lumber

Lee’s Lumber What once was a hobby has now evolved into a business. Creating custom wood pieces from bare logs.

Big Sycamore 48"dia. Started on the big sawmill(54"cut). Then moved over to smaller sawmill to finish off. Cut some 6/4,...
04/02/2026

Big Sycamore 48"dia. Started on the big sawmill(54"cut). Then moved over to smaller sawmill to finish off. Cut some 6/4, 5/4, and 7/8" for draw boxes. Got about 600bf out of it.

With the cutoff on the end, I thought it would make a good corner table.
03/28/2026

With the cutoff on the end, I thought it would make a good corner table.

I've been 2d carving with cnc for about 2 1/2years. I decided its time for 3d.
03/13/2026

I've been 2d carving with cnc for about 2 1/2years. I decided its time for 3d.

Starting to flatten a few slabs to make it easier to see figure in wood. 3 done around 200 left ranging from charcuterie...
02/20/2026

Starting to flatten a few slabs to make it easier to see figure in wood. 3 done around 200 left ranging from charcuterie boards size to 10'long 50" wide. Walnut, White Oak, Red Oak, Locust, Sycamore, Spalted Maple.

01/17/2026

Popular on the ceiling, Cedar on the walls, Hickory cabinets and light trim, frosted glass with live Walnut tops. I milled, kiln dried, planed, tongue and groove the ceiling and walls. CNC texture in cabinets.Lots and lots of sanding with oil based finish.

Needed a new jerky board. I sometimes have a hard time doing just one at a time, so here's a half dozen. I've got more s...
12/21/2025

Needed a new jerky board. I sometimes have a hard time doing just one at a time, so here's a half dozen. I've got more started if anybody is interested.

Cedar cabinet with antler k***s. I had about 22hrs on the textured doors and draws.
11/30/2025

Cedar cabinet with antler k***s. I had about 22hrs on the textured doors and draws.

Got a few unique cookies from a walnut.
11/09/2025

Got a few unique cookies from a walnut.

Cut some shorter logs today. I got some good crotch figure in both Walnut and White Oak. Then a stack of 5/4 Mulberry .
11/07/2025

Cut some shorter logs today. I got some good crotch figure in both Walnut and White Oak. Then a stack of 5/4 Mulberry .

Got my first Sycamore log to saw two years ago. After sawing. Air drying. In the kiln. I finally was able to make some...
06/23/2025

Got my first Sycamore log to saw two years ago. After sawing. Air drying. In the kiln. I finally was able to make something with it. I think it was worth the wait. Sycamore, Hickory, Walnut, and Locust.

A very big American elm. Full of burls. Measures 6'6"×5'6". I had to use chainsaw. My sawmill will cut 4'6" wide. It's l...
06/09/2025

A very big American elm. Full of burls. Measures 6'6"×5'6". I had to use chainsaw. My sawmill will cut 4'6" wide. It's like a garage. Never big enough.

Address

Milo, IA

Website

Alerts

Be the first to know and let us send you an email when Lee’s Lumber posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Lee’s Lumber:

Shortcuts

Share

Category