Peak Handyman

05/19/2026

DIY Tip Tuesday: Water Heater Maintenance 💧🔧

Keep your hot water flowing and help extend the life of your water heater with a few simple maintenance tips! 🛠️

✅ Flush the Tank Once a Year
Sediment buildup can reduce efficiency and damage your heater over time. Drain a few gallons — or flush the entire tank — to keep it running smoothly.

✅ Check the Temperature Setting
Set your thermostat to 120°F for a good balance of comfort, safety, and energy savings.

✅ Inspect for Leaks & Rust
Look around the base, valves, and connections for moisture, corrosion, or rust spots before they become bigger problems.

✅ Test the Pressure Relief Valve
Lift the T&P valve lever briefly to make sure it releases water properly. This helps prevent dangerous pressure buildup.

✅ Replace the Anode Rod
This “sacrificial rod” helps prevent tank corrosion. Checking it every few years can add years to your water heater’s life.

⚠️ Always turn off power or gas to the unit before performing maintenance.

Need help with repairs or replacement?
📞 Contact Peak Handyman today!

05/15/2026

Love waking up in the morning to seeing this!!! I appreciate people who appreciate people!

05/13/2026

Peak Handyman perfecting drywall repairs and texture matching.

repair

05/12/2026

DIY Tip Tuesday: Interior door hardware

05/08/2026

05/06/2026

Just a sample of what projects BIG and small Peak Handyman can tackle!

05/05/2026

DIY Tip Tuesday: How to Remove & Install Caulking Like a Pro

Old, cracked caulk not only looks bad—it can lead to water damage and mold. Here’s a quick step-by-step to freshen things up:

🪛 Step 1: Remove Old Caulk
Use a utility knife or caulk removal tool to carefully cut along both edges. Peel it away slowly, and scrape off any leftover residue.

🧼 Step 2: Clean the Area
Wipe the surface with rubbing alcohol or a mild cleaner to remove dirt, grease, and moisture. Let it dry completely—this is key for good adhesion.

✂️ Step 3: Prep Your Caulk Tube
Cut the tip at a 45° angle and load it into your caulk gun. Start small—you can always cut more if needed.

🧱 Step 4: Apply New Caulk
Run a smooth, steady bead along the seam. Keep consistent pressure for an even line.

👆 Step 5: Smooth It Out
Use your finger or a caulk smoothing tool to press and shape the bead. Wipe away excess for a clean finish.

⏱️ Step 6: Let It Cure
Give it proper time to dry (check the label)—usually 24 hours before exposure to water.

💡 Pro Tip: Use painter’s tape on both sides of the joint for perfectly straight lines—just peel it off before the caulk skins over!

Need help with the job or want it done perfectly the first time?
📞 Peak Handyman has you covered—Quality Service Above the Rest!

05/04/2026

🔧🏔️ Need Reliable Help Around the House? Peak Handyman Has You Covered! 🏔️🔧

At Peak Handyman, we take pride in delivering QUALITY SERVICE ABOVE THE REST—and we mean it. Whether it’s a small fix or a full home improvement project, we bring professionalism, craftsmanship, and attention to detail to every job.

✅ Drywall repair & finishing
✅ Painting (walls, ceilings & more)
✅ Fixture & ceiling fan installation
✅ Plumbing fixes & clogged drains
✅ General home maintenance & repairs
✅ And much more!

No shortcuts. No guesswork. Just solid, dependable work you can trust.

🏡 Why Choose Peak Handyman?
✔ Honest, dependable service
✔ Skilled workmanship
✔ Clean, professional results
✔ Locally trusted

Don’t let that to-do list pile up—let us help you tackle it with confidence.

📩 Message us today to schedule your next project!

Peak Handyman
*Quality Service Above the Rest

04/29/2026

Leveling the entire bathroom floor on this old settled slab. No sliding off the toilet on my watch 😂

04/28/2026

🛠️ DIY Tip Tuesday: Cleaning your Driveway

Give your driveway a fresh, clean look this week with a simple DIY power wash!

🚿 Step-by-step tips:
• Start by sweeping away loose dirt, leaves, and debris
• Treat oil stains with dish soap or a degreaser—let it sit for 10–15 minutes
• Use a pressure washer (or a strong hose nozzle) and work in even, overlapping passes
• Keep the wand moving to avoid streaks or surface damage
• Rinse thoroughly and let it dry completely

💡 Pro Tip: For stubborn stains, a mixture of baking soda and water can help lift grime without harsh chemicals.

A clean driveway instantly boosts curb appeal and helps extend the life of your concrete!

Not into DIY or don’t have the equipment? Peak Handyman has you covered—message us anytime for help 👍