Ouachita Mountains Electric Company

07/28/2023

Love the shirt Mrs Donna got for me.

09/21/2022

09/21/2022

Finishing up on this 400 amp site set up, ready for RV's and waiting on house build.

09/21/2022

Just another 400 amp remodel, lots of stuff to fix, but we got it.

04/10/2022

After ditch is dug and pipe in ground still alot of work involved in building a stand for the 400 amp service with one transfer switch for house power. But it's up and waiting on Entergy.

09/26/2019

Heres a quick view of another job well done by OMEC. This is a 60x60 shop, now equip with several several outlets and lights as well, for both general lighting and work bench lighting. This shop is wired up to code, and we took a few extra steps here and to make it as nice as we could, for example: every light switch and outlet in piped in with metal conduit and they are also all recessed into the tin. Eliminating the possibility of bumping into them hanging on the wall or them being in the way of putting any item against the wall. We had to rent a scissor lift for a week to hang all the lights, and we actually discovered a new rental company in hot springs, which gave us the lowest prices we've had so far for equipment rental, helping us get the job done as efficiently as possible. In some areas where we had larger pipes and larger wires in pipes, the pipe weighed quite a bit, so we built braces to help hold the pipe up straight, we even painted them and the light brackets to match the color of the red iron. Thanks to Stan Wagner for hiring us to wire up this shop, it was a pleasure working with you Stan and we hope to help you with any and all of your electrical needs in the future.

09/06/2019

Truck #3 king cab gotta have room for the laptop and printer for on site invoicing.

08/29/2019

Here's a few pictures from our job yesterday at Mrs. Barbara Johnson's here in Mount Ida. A tree had fallen and tore apart the existing electrical service. We built an entire new service, up to code requirements, and we moved the new one over a few feet because the old one went over the roof of her well shed. When we arrived on site she had been without electricity for about a day, and Entergy could not make it out there until today. That would have almost 3 days without power, Mrs. Johnson was concerned that all of her food would spoil. So we brought our generator from our house and plugged in her refrigerator and freezer for a couple of hours until we left. We finally got everything done at about 6:30pm, and we just drove by a few minutes ago to check and make sure Entergy made it out there, Mrs. Johnson has power and OMEC has another pleased customer. 😁⚡

08/18/2019

Ouachita Mountains Electric Co. is based just outside of Mount Ida, AR. We work in most surrounding towns including Glenwood, Hot Springs, Mena, Oden, Story, Norman, Mountain Harbor, and of course Mount Ida. We do any and all electrical work, from fixing simple things like a bad light switch, to new houses and new construction. We are involved in Residential and Commercial work, we are also all licensed electricians, insured and bonded, and we make certain all of our work complys with the National Electrical Code. We take pride in our work, and we strive for excellence. Feel free to give us a call, send us a message, or email us anytime for any questions, contact information is on our page, and while your there give us a like!

08/18/2019

This is another garage we wired in Mountain Harbor. We added: a security light out front so when a person pulls up it turns on and you can see out front, a sconce light by the door, and plenty of circuits for outlets and some 8ft LED fixtures to light up the inside.

08/18/2019

Our page is new, so if we've worked for you feel free to leave us a review here on our page. Thank you!

08/18/2019

These are pictures from Perry Rutledges house here is Sims, his lighting in his driveway had been damaged by the landscaper when mowing. When we replaced the cut wire we dug a ditch, laid pipe, and pulled the wire in the pipe making sure it was up to code and that there was no future possibility of damaging the wire again, atleast not by mowing.