Grizzly Garage Door Repair

Grizzly Garage Door Repair $99 Garage Door System Check & Safety Tune-up!

Same Day Service
24/7 Emergency
365-Day Warranty on Every Repair
Serving New Hampshire - Pelham, Windham, Salem, Merrimack, Nashua, Manchester, Hooksett, Auburn, Derry, Londonderry, and more!

This was absolutely wild! 😲 You probably just hit your garage door opener and your door goes up and down, but you don't ...
06/18/2026

This was absolutely wild! 😲

You probably just hit your garage door opener and your door goes up and down, but you don't think about how quickly things can get dangerous.

There is no telling what can happen in the blink of an eye!

Yearly maintenace can help you spot minor issues before they turn into huge problems.

Be safe out there!

06/15/2026

Here in Hudson, NH for a garage door tune-up!

This is the smoothest and Cleanest garage door installation we have seen in a while after working on so many older doors lately!

These homeowners were proactive and just wanted to stay ahead of the game with a full lubrication and inspection.

This garage door has many great years ahead!

Here in Bedford NH for a garage door tune-up! We were only contacted to tune-up one door but we always check all doors a...
06/12/2026

Here in Bedford NH for a garage door tune-up!

We were only contacted to tune-up one door but we always check all doors and openers for good measure.

This is the second door that doesn't get used often but figured it could use an extra set of eyes.

Looks like it was completely missing a lag screw. Since we always carry an assortment of hardware, we secured a lag screw, and brought it back to a safe operation.

It seems the lower panel might have a bow in it from years in the sun and the lag screw worked itself loose.

We visited Bedford NH last week, and found the chain adjustment nut was backed off. Everything else was in good working ...
06/10/2026

We visited Bedford NH last week, and found the chain adjustment nut was backed off.

Everything else was in good working order after a quick lubrication, but this caught out eye.

Something simple now but could have put strain on the chain and opener down the road.

06/08/2026

Back in Bedford, New Hampshire for garage door opener repair!

This garage door opener is an old one!

This dates back to the late 80s/ early 90s. So old that it doesn't have any safety sensors.

06/05/2026

In Manchester, New Hampshire for Genie garage door opener repair!

This Genie garage door opener was just clicking when you went to operate it.

Upon further inspection, the safety sensors were original from the previous garage door opener of another manufacturer.

Luckily, this awesome homeowners had the Genie safety sensors stored in the house.

We wired them up quickly, reset the travel limits of the door, and everything was operating quietly, and smoothly.

We love a simple, quick fix for the homeowner that saves money!

Back in Bedford, New Hampshire for garage door repair! We came across pulleys that were completely worn out and it was t...
06/03/2026

Back in Bedford, New Hampshire for garage door repair!

We came across pulleys that were completely worn out and it was time for replacement.

The bearings were so worn out that the door would not go down all of the way and the dooe opener was forced to open.

We replaced all four pulleys on each door, lubricated all components, and the doors was working quietly and smoothly once again!

06/01/2026

Out with the OLD and in with the NEW!

We took a scenic cruise all the way up to Dublin, New Hampshire for this garage door opener install.

The old Chamberlain garage door opener was not sensing the safety eyes. We troubleshooted with another pair of safety eyes, and concluded that the opener was failing internally.

After 18 years of operation, we agreed that it was time to replace the opener with something modern and a whole lot quieter. We upgraded to a whisper-quiet belt drive garage door opener with WIFI connectivity.

We also upgraded the door opener hangers with super sturdy punched angle iron opposed to the punched strapping that has been holding it into place all of these years.

Here in Hooksett, NH for a garage door tune-up! We were just scheduled for a simple tune-up, but found that the header b...
05/31/2026

Here in Hooksett, NH for a garage door tune-up!

We were just scheduled for a simple tune-up, but found that the header bracket had completely pulled out of the wall.

Before these pictures, this bracket was completely flipped up, and slammed into the wall.

If you look closely, you can see that the garage door opener rail got pushed into the ceiling, and carved itself into the sheet rock.

We caught it and set some new lags into the stud and got a good secure mount.

05/28/2026

We found some very loose nuts and bolts on this old wooden garage door in Nashua, NH!

A couple of nuts were actually ready to fall completely out and hit the floor but we got there just in time.

Don't forget your garage door needs love too!

garagedoorrepair

Address

221 Main Street STE A
Nashua, NH
03060

Opening Hours

Monday 7am - 7pm
Tuesday 7am - 7pm
Wednesday 7am - 7pm
Thursday 7am - 7pm
Friday 7am - 7pm
Saturday 7am - 7pm
Sunday 7am - 7pm

Alerts

Be the first to know and let us send you an email when Grizzly Garage Door Repair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Grizzly Garage Door Repair:

Share