Wood Song Canoes

Call Directions Website Contact the business

Wood Song Canoes Artisan Woodworker, Philip A. Greene, DBA Wood Song Canoes since 1987. His work can be viewed at: etsy.com/shop/woodsongcanoes In 1983, I joined the U.S.

Specializing in custom designing and building high-end wooden canoes, paddles, furniture, and furnishings. I was born and raised in Northwestern Connecticut (Norfolk) until the age of 13. As a young 6-year old child, I became VERY interested in canoes, boats, and fishing...stripping the bark off white birch trees and building miniature birch bark canoes. I injured white pine trees, then gathered the pitch which I melted into the bark canoes; rendering them seaworthy by sealing any leaks. In 1978, my parents purchased a 350 acre dairy farm in Northern New York (Hopkinton). I was a "hands-on" kid, who loved fishing and building all sorts of things from items found on the farm, including snowshoes. I graduated High School from the tiny Canton Christian Academy in Canton, NY in 1982. Navy, and volunteered to serve as a Sonar Tech on Submarines. I attended several Navy Tech Schools in Great Lakes, IL, Groton, CT, and San Diego, CA, returned to Hopkinton, NY to marry my wife Paula around Christmas of 1984. In March of 1985, I was assigned to the USS James Monroe SSBN 622 Gold in Charleston, SC, serving aboard her for a little over 4 years. While aboard this sub, my 2 eldest children, Jenn and Timmy were born. During this time, I took interest in building my own strip canoe at the age of 23...a "less-expensive" pathway to obtaining a faster, more stable canoe from which I could launch many successful fishing trips in SC's Lake Moultrie and surrounding areas. This was delusional thinking on my part, so Paula suggested that I build a second canoe to give to my Dad in Northern NY...2 canoes would theoretically lower the average cost to build each canoe because I would only need to purchase equipment one time. Around this same time, (June of 1989) I transferred off the USS James Monroe and took 3 weeks of leave...2 of those were on a canoe trip to Baxter State Park in Maine, where we tested out my prototype 19' long Redwood "Silkwood" model canoe. Great all-around hull! Upon returning to Charleston after my leave, I was assigned to the USS Tecumseh SSBN 628 Blue in late June of 1989. On September 21st, the massive Hurricane Hugo came through Charleston, and demolished our home. I was on the Tecumseh that night, which was 1 of 2 Navy vessels unable to escape Hugo due to technical issues. We stayed moored to Pier Charlie on the Weapons Station in Goose Creek, and weathered the storm unharmed. My wife and 2 children stayed with a friend where they were also unharmed. But our home was totaled. Hugo was actually a blessing in disguise. We were able to purchase 5 acres of property in rural Round O, SC, further inland and a 46 mile commute to the Charleston Navy Base. We were able to purchase a new larger home there, and had 2 more children...Daniel and Rose. I stayed with the USS Tecumseh for nearly 4 years, and continued building canoes and paddles in my spare time when not on the submarine or training. My shop was too small though...only 10 feet X 16 feet. So we built a larger, temporary "shelter", that was somewhere between a picnic pavilion and a tent...closer to a tent. That gave me space under which I built a couple more canoes. In January of 1993, I was told that I MUST take a Shore Duty position, and the only job available was at the large Navy Brig (prison) in North Charleston. So I went to a 6-week Navy Corrections Officer School in Anniston Alabama, then returned to Charleston for nearly 3 years as a Corrections Officer. This was NOT a job that I desired...I only accepted it because it guaranteed me to be able to stay in the Charleston area for 3 more years. While serving at the Brig, I invested my reenlistment bonus into a new shop that I would build. We had some huge pines (30-26" diameter) on our land, plus a few smaller ones. I felled them, then had a sawyer with a portable mill come to my property and mill them according to my cut-list...I had designed my new 2-story, 28' X 46' shop similar in shaped to the gambrel-roofed dairy farms up north, with which I was quite familiar. It took a couple of years to build the shop to completion, during which we kept building canoes and paddles, attended our first wooden boat shows...winning several "Best-of-Show" awards in Georgetown, SC ('93, '94, and '96) and 1st Place Peoples Choice at the mega WoodenBoat Show in Southwest Harbor, Maine in 1994 and 1995. While at the Brig for the final few months of my time there, I was asked to fill the position as the Military person in charge of the Wood Shop...one of several Shops at the Brig designed to assist prisoners in rehabilitation back into society. I gladly accepted, and was then asked if I would consider a special assignment teaching a core group of volunteer prisoners how to build a strip canoe. Of course I agreed, and this special program was a huge hit...the "PERS84" Officer, in charge of all Navy Brigs, and based in Washington DC, made several trips to see this project through its completion. To this day, the mahogany canoe is still on display at NavConBrig Charleston. But most importantly, I learned that I LIKED to teach...and that I was really good at it too. I left the Brig in January of 1996, and boarded my last submarine, the USS L. Mendel Rivers SSN 686 out of Norfolk, VA. I served aboard her for 16 months while Paula, my sister Naomi, and her husband Rob ran Wood Song Canoes. In May of 1997, I exited the Navy (no retirement) and became a full-time artisan woodworker. The stories I have accumulated since 1987 are numerous...enough to fill an entire book. The clients, the shows, the projects, the media events (over 30 major magazine feature articles), the celebrities, even a real Red Carpet Hollywood event at the Beverly Hilton with the Cast of "Friends" in September of 1997. Those stories will have to wait until I can relay them in person, should you make the trip to Round O, SC to visit my shop. In 2009, right after the serious economic downturn, I made the decision to incorporate furniture along side the wooden canoes and paddles. Every year brings new challenges and I never know where I'll be focusing my woodworking efforts...whatever clients commission me to design or build, that's where my focus will be that year. Canoes, paddles, furniture...and even one-on-one tutoring sessions. If I love to design it, build it, or teach it...challenge accepted!

NEARLY FINISHED!I just finished spraying 4 coats of Axalta's Imron MS-1 clear coat on both the Curly Maple Baptismal Fon...
10/29/2026

NEARLY FINISHED!

I just finished spraying 4 coats of Axalta's Imron MS-1 clear coat on both the Curly Maple Baptismal Font and its Curly Black Walnut table.

Just 4 more steps until it's complete.

1. Wait 2 weeks then flatten/fair the finish with either 400 or 600 grit (haven't yet decided)

2. Apply the N3 Nano ceramic coating to create an even satin sheen.

3. Install the ball-bearing roller feet into the bottom of the table legs.

4. Deliver and CELEBRATE!!

Big Day today!  Last Tuesday, I started building an 8' X 20' X 8' tall spray booth inside my dehumidified dry-room... ov...
10/26/2026

Big Day today!

Last Tuesday, I started building an 8' X 20' X 8' tall spray booth inside my dehumidified dry-room... over the 10' X 42" wide, Claro Walnut single-piece slab table top.

I finished building the booth around noon, and was able to spray the finish on this afternoon. The finish is Axalta's Imron MS-1 clear coat designed for Marine-grade finish work on yachts.

And while it IS high-gloss, after it cures, I will flatten the finish smooth to get rid of the orange peel texture and any defects like a speck of dust. Then I will apply N3 Nano to get the perfect satin sheen (not high-gloss).

Baptimal Font project update:Conducted the final 400-grit sanding on Monday. Then signed, dated, numbered it, and epoxie...
10/17/2026

Baptimal Font project update:

Conducted the final 400-grit sanding on Monday.

Then signed, dated, numbered it, and epoxied it on Tuesday... applying 4 coats with a 1" Purdy brush with tapered bristles. MAS epoxy; Low Viscosity Resin and Slow Hardener.

The epoxy will act as the primer for the Imron MS-1 clear coat. After a minimum of 7 days of curing, I will sand the cured epoxy fair and smooth to 400 grit, then apply 4 coats of the Imron MS-1.

Other than my grinder "accident" 3 weeks ago, this has been an awesome project to create.

Update on the Baptismal Font for the Chapel at Shawn Jenkins Children's Hospital.Process is explained in the video.
10/12/2026

Update on the Baptismal Font for the Chapel at Shawn Jenkins Children's Hospital.

Process is explained in the video.

2-weeks worth of updates on the Baptismal Font.11 days ago, while using my large 13 amp angle grinder and wood carving d...
10/03/2026

2-weeks worth of updates on the Baptismal Font.

11 days ago, while using my large 13 amp angle grinder and wood carving disc, I "carelessly" allowed the wrong edge of the disc (back edge) to barely graze the wrong component of the Font Table trestle during a "back sweep".

The disc, with hundreds of tiny tungsten carbide teeth, spinning at 9,000 rpm (119 mph at the disc's perimeter), did what it's designed to do... aggressively "bite" into the wood. I have somewhere between 1,000 & 2,000 man-hours using these type of wood sculpting discs over 35 years. I know what these discs are prone to doing if you get the attack angle wrong or sweep the disc in the wrong direction... it goes into what I refer to as the "Eat and Run" mode.

I know what I'm doing, and I'm fully aware what the disc is capable of doing when it Eats & Runs... it's happened probably 100 times to one extent or another; usually injuring the workpiece, not the worker, and usually minor "dings". This incident was not that. This time it Ate the wood badly, giving it traction and Ran, gaining speed as it tore the grinder from my hands and launched at my face. It left teeth marks across my safety glasses, slamming into my cheekbone, and finally riding up and over my hearing protection, breaking them and knocking them off before hitting the concrete and shutting off. (I did not post the worst, most graphic photos... it was a deep wound)

The entire incident started and ended in about .5 seconds. I saw stars and nearly went down... definitely the worst injury that I have incurred in the past 15 or more years. After taking a few days off to ensure that I kept wood dust out of the wound, I "got back on that horse" this past Monday and finished my grinder work. Using these grinders, you cannot be timid with your technique. But you HAVE to be aware of what it will do if you're not careful, and then be slow and deliberate. If a certain angle of attack feels awkward, that's likely when it's being put in a position of increasing likelihood that it may Eat & Run without an invite to dinner!

Yesterday, I reached the point where there's only about 2 hours of rasp-work left on the table, then it's all hand-held abrasives before finishing.

Those who follow my woodworking business, know that I'm known for producing new work, not repairing broken heirlooms.  B...
09/27/2026

Those who follow my woodworking business, know that I'm known for producing new work, not repairing broken heirlooms.

But this past spring, I Posted photos of my new work in one of the Aiken (South Carolina) Facebook Groups, and a member of that Group inquired as to whether or not I did repair work on wooden objects. She had a life-size swan decoy made in 1983 by the famous bird decoy maker Kevin Kerrigan. During a move to Aiken, it had been dropped by the mover, and the head and neck were broken... 3 pieces plus the main body... could I fix it?

It looked "doable", with my major fear being whether I'd be capable of matching the paint which was "antiqued" white from its creation.

I agreed to do it on an hourly-rate basis, and we met at the South Carolina Artisans Center in Walterboro to transfer custody of the "patient" in critical condition.

The following photos show some of the steps required to bring the swan back to life. I used steel threaded rod (7/16" diameter) inserted into the broken pieces, and added acrylic paint to turn the clear epoxy into the antique white that I wanted. The repair took several steps over a few weeks' time, and included a fresh pair of glass eyes as one of the eyes was missing. The structural repairs came first, followed by cosmetic repairs... matching the paint over the repairs so that it looked original. Matching a "clean" solid color would have been easy, but this had to match the antiqued look... a first for me.

Today the owner stopped by my place and picked up the swan... I could tell by the smile on her face that she was as happy with the repair as I was. X Now I can add "Decoy Repairman" to my resume!

Update on the Baptismal Font project.The past week was focused on selecting which portions of a large board of figured m...
09/18/2026

Update on the Baptismal Font project.

The past week was focused on selecting which portions of a large board of figured maple should be used in the Font, and which way to orient the grain and annual growth rings.

(8' X 18" wide X 12/4 from Custom Woodcrafter in Summerville, SC)

Using the 1/4 scale model Font as the standard, I determined the outer dimensions required for each layered lamination, made patterns, cut the planks to length, flattened, traced patterns, cut ellipses, sanded edges to lines, and glued laminates together.

The shaping process is best understood by viewing the photos in sequence.

The next steps (second half of the Font build) will be final sanding, applying waterproof epoxy to the inside and outside of the Font except for the very bottom. Then embed the 2 magnets into bottom, sign the "memorial statement" for Carter on the Font bottom, and epoxy the bottom. After the epoxy cures for a week or more, I will "fair" the bumpy epoxy smooth with abrasives and apply the finish. Then the finish will need to be hand-rubbed flat and smooth.

UPDATE!Keeping in mind that the first 2 photos are of the 1/4 scale prototype model, the following Post is an update to ...
09/10/2026

UPDATE!

Keeping in mind that the first 2 photos are of the 1/4 scale prototype model, the following Post is an update to the Full-Scale Baptismal Font that I have custom designed and am making for the Chapel at MUSC Shawn Jenkins Children's Hospital in Charleston.

The table portion of the piece is, as of this morning, completely assembled. After the epoxy cures, it will be at the point where I can start shaping the compound curves... or as I call it: "The FUN stuff!"

08/28/2026
08/28/2026

Large (10' X 41.5" X 2.5") Table Top, custom commissioned to be a dining table to seat 10.

SINGLE-PIECE!! Figured Claro Walnut from Oregon.

Started out at just under 24 feet long X up to 84" wide (wide end was cut off to build another table) and 3.25" thick. 420 bdf in a single slab!

Hoping that the client will order 10 chairs to go with it... which would be a 60 week minimum job.

Address

425 Jessie Lane
Round O, SC
29474

Opening Hours

Monday 9am - 7pm
Tuesday 9am - 7pm
Wednesday 9am - 7pm
Thursday 9am - 7pm
Friday 9am - 7pm
Saturday 9am - 7pm
Sunday 1pm - 5pm

Telephone

+18439089091

Alerts

Be the first to know and let us send you an email when Wood Song Canoes posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Wood Song Canoes:

Shortcuts

Share

Category

Nearby home improvement businesses