Corcoran Carpentry

Corcoran Carpentry Corcoran carpentry is here to bring new life to your kitchens, bathrooms and remodels

This is a bench I made recently. For fun, not commissioned. I built another bench and had a thought while it was sitting...
08/10/2024

This is a bench I made recently. For fun, not commissioned. I built another bench and had a thought while it was sitting on my work bench that it was a bench on a bench. So I made one that’s a bench on a bench. Anywho, the dimensions on it are about 20” tall, 12” deep and 42” wide. The inner bench is made from maple, it was steam bent to shape and stained a charcoal black. The outer bench, the red, was a mix of cherry and alder with an old fashioned cherry stain.
One real caveat with the drawer as I didn’t want to take away from the inlay, so there’s no handle or drawer pull on the front, but there is a way to reach under and pull it open.
Currently listed on marketplace for $1200. Call text or email if interested in this piece or having one custom made to your own specifications

Here’s a greenhouse Corcoran Carpentry just built. We took care of the concrete slab, getting it formed and poured, asse...
07/21/2024

Here’s a greenhouse Corcoran Carpentry just built. We took care of the concrete slab, getting it formed and poured, assembly of the actual greenhouse, and then an L shaped workbench built inside. All done on a tight timeline for a dedication to a retiring ceo.
July 2024

This was a porch railing I was asked to install in the Lyon’s area. June 2022
06/11/2024

This was a porch railing I was asked to install in the Lyon’s area.
June 2022

Really it’s just a smaller shed added on to the original. But when you need some extra space, there’s always a wayApril ...
06/05/2024

Really it’s just a smaller shed added on to the original. But when you need some extra space, there’s always a way
April 2021

This was an add on to the backside of a garage. The property owner had a local builder planning this project but asked i...
06/05/2024

This was an add on to the backside of a garage. The property owner had a local builder planning this project but asked if I would give the guy some help. So I went over and took a look. The plan was supposed to be for a shed type roof. I called up the property owner and said I didn’t like the plan. Every building on the property has a gable valley tie-in, so this one addition would stand out. And the shed type roof was going to really limit head height. So the plan got changed. I think it cost maybe an extra $500 in material if I remember right. I helped get it framed in and then came back to insulate and bring in power ⚡️
April 2021

This was a 12x24’ pole barn built for agricultural purposes. The front was to be left open, and the property owner wante...
06/05/2024

This was a 12x24’ pole barn built for agricultural purposes. The front was to be left open, and the property owner wanted an asymmetric roof to match other buildings on the property.
June 2021

This is the completed kitchen with backsplash in, sink installed, all the under lights wired and installedThis was a joi...
06/05/2024

This is the completed kitchen with backsplash in, sink installed, all the under lights wired and installed
This was a joint venture with American General, LLC
May 2024

This project started with a piece of granite that a client purchased on sale. They asked if I could make a kitchen islan...
06/02/2024

This project started with a piece of granite that a client purchased on sale. They asked if I could make a kitchen island out of it. The only thing to work around with it was that only 3 sides of the granite slab were finished. So I made a plan for two cabinets, one that would hold the 8’ granite piece, and one that would hold a butcher block and act to cap the end of the granite slab. The big cabinet had two narrow banks of drawers on each side and two wide deep drawers in the center. The cabinet for the butcher block had a garbage can pullout and two shelves.
After bringing in the island and getting the granite set on top the client asked if I would tile the counters and backsplash in a granite that matched the island. We did our best to match. Set the granite tile, installed a new sink, and I painted the old cabinets to match the island. Client said they liked the two tone look so the uppers stayed the same.
November 2017

This is the first real project taken on after moving back to Oregon. It started with two water leaks, one small leak in ...
06/02/2024

This is the first real project taken on after moving back to Oregon. It started with two water leaks, one small leak in a bedroom and the major one happening where the old shed type roof tie-in was. I made a choice for a design change, because the house across the street had a hip valley tie-in. I didn’t like how shallow the shed type roof was and was going to change it one way or another, so I opted for making it a hip valley and matching the roof pitch that the rest of the roof has.
After starting the tear off to make the change I found a few issues with the previous roof install itself and made the choice to do a full tear off and a fresh roof install.
After redoing the roof I was able to go inside and replace all the insulation and sheetrock. Skip trowel finish. Painted the walls and ceiling. Installed vinyl plank flooring, I milled up some wood and installed wainscoting, picked a color the homeowner liked and then painted the trim and wainscot to match.
August-September 2022

This is a cabinet I made for a small apartments kitchen. Supplied paint ready. The property owner later asked me to make...
06/02/2024

This is a cabinet I made for a small apartments kitchen. Supplied paint ready. The property owner later asked me to make a small cabinet to fit between the fridge and the oven but unfortunately neither him nor I have photos of that bit of the project
February 2019

This project I got called out to finish. The previous contractor got burned out I think with the extent of work, because...
06/02/2024

This project I got called out to finish. The previous contractor got burned out I think with the extent of work, because the client was easy to work for and paid well. My job was to finish the tile set, grout everything, close off the wall that was open for plumbing, set a couple of closet doors and one main door, set the toilet, and finally to finish off the crown molding
April 2022

This was an investment property a friend bought. They asked me to come through and paint, set new laminate flooring, rep...
06/02/2024

This was an investment property a friend bought. They asked me to come through and paint, set new laminate flooring, repair some loose tiles, set some new doors, new toilets, and to install some new lighting.
April 2022

Address

8593 Olney Street SE
Salem, OR
97317

Telephone

+17077980692

Website

Alerts

Be the first to know and let us send you an email when Corcoran Carpentry posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Corcoran Carpentry:

Shortcuts

Share

Category