Dialed In Creations

Call Directions Website Contact the business

Dialed In Creations Nerds making nerd sh*t

So there was a random machine mishap overnight. I started a job in the evening on our machine we call Teddy. Nothing cra...
10/28/2026

So there was a random machine mishap overnight. I started a job in the evening on our machine we call Teddy. Nothing crazy but some fidget toys

The nozzle tip everything prints through we use is .4mm diameter. It's kind of the standard but we use a silicon carbide nozzle because they last longer and print smoother.

During the job the printer decided to literally ram the nozzle into the bed plate. The images you see are the stock nozzle, a new nozzle, and the one that decided to freak out.

I would say it's no longer .4mm diameter.

It's been a busy day for me. We needed to address some vibration issues so a quick Lowe's run for foam padding and concr...
10/21/2026

It's been a busy day for me. We needed to address some vibration issues so a quick Lowe's run for foam padding and concrete pavers.

Printers all pulled off the table. Everyone wiped down for dust and set back up. Hopefully, we see a lot less vibration created by Bob (left). The big bed on the machine has a lot of weight to throw around, so it shakes everything when it does.

Now we should be about to run high speed materials in the K2 dubbed Teddy. Now if the parts for the 3rd machine in the middle could hurry and get here so I can get that machine back online. It's barely a month old, but because the design of the printer is advanced, the special magnet it uses to heat nozzles up broke off one day recently. Fortunately, Bambu Lab's support was quick to get me set up for my new part to repair.

Capabilities increase by the day; time for new prints is coming. We hope you stay tuned!

10/17/2026

Teddy lives!!!

This machine has been down for months because one little wire got sheared. The part is not available to purchase online because of the tariffs and trade issues right now.

Fortunately with some help from the printing community I managed to get the problem solved. Creality has been nice enough to get me the official replacement part but it will take a few weeks to get here.

Huzzah, more printing capabilities!!!
(and a huge amount of stress off mine and Lenas back)

It’s been a busy, high-energy week in the shop! Here’s a peek at what’s fresh off the printers and the paint desk:🛠️ Gri...
10/01/2026

It’s been a busy, high-energy week in the shop! Here’s a peek at what’s fresh off the printers and the paint desk:

🛠️ Gridfinity Box Test: Just wrapped up printing the 2nd lid! The test prints turned out crisp, and support removal was effortless. Might just have to print another set because of how clean it turned out.

🎲 Dice Towers: Freshly prepped and ready for action! Medusa's head is officially lined up for painting, while our oozy green dice tower came out with rotten perfection—looks straight out of a horror movie cauldron!

🎨 Custom Miniature Painting: Currently bringing new life to a family member’s figures. Upgrading them from basic single-color models to detailed custom pieces, starting with an epic axe ready for DnD night.

🦅 Fawkes the Phoenix: After a brief pause for machine maintenance, our massive red & orange phoenix is back on track! Just finished up his beak and feet. The nieces and nephews already nicknamed him Fawkes, and it’s too fitting not to stick!

👇 Which project is your favorite? Let us know in the comments!

The ADHD hyperfocus has been driving the print shop lately! 😅 We’re working on posting more consistently, but sometimes ...
09/28/2026

The ADHD hyperfocus has been driving the print shop lately! 😅 We’re working on posting more consistently, but sometimes we get totally locked into creating.

A massive shoutout to one of our awesome customers and supporters who loves to challenge us whenever she hears we're experimenting with new ideas!

Lately, we’ve been diving into the open-source Gridfinity system. We didn't invent it, but the possibilities are endless! From organizing kitchen drawers and shop toolboxes to creating custom, interlocking, and stackable utility boxes, it works for almost anything. We can customize the bin sizes and even embed magnets into the lids and bases so your setup stays locked in place.

We’re printing these using PETG—it’s much sturdier than the material we use for our fidgets, toys, and dice towers. It’s tough without being too heavy, comes in great colors (including transparent options), and is perfect for organizing tools or craft supplies.

We are especially loving this electric blue and dark grey combination! The matching handles and latches really tie the whole look together.

Stay tuned—we’ll share more photos in the coming days once everything is polished and fully assembled! 🛠️✨

From the halls of Valhalla straight to your game table. 🛡️🌌🐦‍⬛Feast your eyes on the Raven’s Feast Dice Tower! Fresh off...
09/24/2026

From the halls of Valhalla straight to your game table. 🛡️🌌🐦‍⬛

Feast your eyes on the Raven’s Feast Dice Tower! Fresh off the print bed and finished in Galaxy Twilight, this piece brings pure Norse mythology to life.

The dark tones mixed with the subtle cosmic sheen highlight every etched rune, towering peak, and raven wing on the build. Whether you’re calling upon Odin’s luck or rolling to survive your DM’s next boss battle, this tower commands the tabletop.

✨ Build Details:

Model: Raven’s Feast Dice Tower

Filament: Galaxy Twilight

Vibe: Dark Norse fantasy meets cosmic aesthetic

Which would you choose for your next campaign: the dark spires of the Obsidian Tower or the mythical power of the Raven’s Feast? Let us know in the comments! 👇

Day vs. Night: The Jack-o'-Twister in Action! ☀️➡️🌕🎃Swipe through to see the full transformation! By day, this Jack-o'-T...
09/22/2026

Day vs. Night: The Jack-o'-Twister in Action! ☀️➡️🌕🎃

Swipe through to see the full transformation! By day, this Jack-o'-Twister rocks a crisp, clean finish—but once the lights drop, that high-charge glow filament completely takes over! 💡⚡️

Which look are you liking more: the subtle daytime detail or the intense night glow? Drop your vote in the comments below! 👇

✨ Build Specs:

Model: Jack-o'-Twister Fidget

Filament: Glow-in-the-Dark PLA

Vibe: Spooky season essential 🎃

09/22/2026

Light up the dark with the Jack-o'-Twister! 🎃✨🌀

Check out these Jack-o'-Twisters coming off the print bed! Printed in Glow-in-the-Dark filament, these spooky fidgets look awesome in the light—but they really reveal their magic when the lights go out! 💡➡️🌙

Press play to see them in action, and get ready for Halloween season!

✨ Build Details:

Model: Jack-o'-Twister

Filament: Glow-in-the-Dark

Vibe: Spooky, satisfying, and ready for spooky season! 🎃

Who's ready for Halloween printing? Let us know in the comments! 👇

Forged in the dark reaches of our workshop and printed in mesmerizing Galaxy Twilight, the Obsidian Dice Tower (designed...
09/21/2026

Forged in the dark reaches of our workshop and printed in mesmerizing Galaxy Twilight, the Obsidian Dice Tower (designed by STLFLIX) has officially arrived!

With spire-like peaks and an ominous silhouette straight out of Mordor, this piece brings true dark-lord energy to your tabletop campaigns. Whether you're rolling critical hits or sealing the fate of your adventuring party, every roll down this fortress feels legendary.

✨ Details:

Design: Obsidian Dice Tower by STLFLIX

Filament: Galaxy Twilight (giving it that subtle, cosmic sheen over a dark, menacing frame)

Perfect for: D&D, Pathfinder, or any tabletop RPG where you need to intimidate your players.

Would you dare roll your fate down this tower, or leave it to Sauron? Let us know in the comments! 👇

Here's one of our recent order's that went out. This goes back to our home state of Texas to some of the players on Cast...
09/21/2026

Here's one of our recent order's that went out. This goes back to our home state of Texas to some of the players on Castroville United. We hope you enjoy your tags and good luck on your season!

Address

San Antonio, TX
78252

Opening Hours

Tuesday 9am - 9pm
Wednesday 9am - 9pm
Thursday 9am - 9pm
Friday 9am - 9pm
Saturday 9am - 9pm
Sunday 10am - 5pm

Telephone

+12103180717

Alerts

Be the first to know and let us send you an email when Dialed In Creations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dialed In Creations:

Shortcuts

Share

Category

Nearby home improvement businesses