Studio 66 Custom Design Stained Glass

Studio 66 Custom Design Stained Glass Specializing in custom design stained glass, Jerry, our Studio 66 artisan transforms an ordinary room into serene transmissions of light.

Celebrating its tenth year in business in 2011, Studio 66 is a woman owned, full service home-based Stained Glass Studio including Classroom instruction and retail sales located in the heartland of the USA on the Prairies of South Dakota. Using complex intricately cut, detailed, flowing, and richly colored designs that capture light and glow within like the prairie sun, your personal style is refl

ected in your glass art panels. Old world techniques of painting and firing glass, enhance the translucent creations.

The releading of the right panel is complete. Next, solder all joints on both sides and create a new zinc frame.
10/20/2022

The releading of the right panel is complete.

Next, solder all joints on both sides and create a new zinc frame.

Finished removing the old putty and cleaning each piece on the right panel. Recut eight pieces. Next, begin the releadin...
10/07/2022

Finished removing the old putty and cleaning each piece on the right panel.
Recut eight pieces.

Next, begin the releading.

The old lead came has been removed from the right panel. This panel had a lot of damage that was repaired at some earlie...
09/16/2022

The old lead came has been removed from the right panel.
This panel had a lot of damage that was repaired at some earlier time.
Six pieces are not original and many of the slimmer pieces had their thin tips broken off.
I have tried to purchase old clear glass (which had a green cast due to a higher iron content) but to no avail. So I will use modern glass, if needed.
Next, clean each piece, remove any old putty, and replace pieces, if required.

The right panel has been removed from the wood sash. Next, cut off the old lead came.
09/14/2022

The right panel has been removed from the wood sash.
Next, cut off the old lead came.

The left panel has been completed!Next, remove the right panel from the wood sash and remove the old lead came.
09/11/2022

The left panel has been completed!Next, remove the right panel from the wood sash and remove the old lead came.

09/09/2022

One of our favorite stained glass choices

The back side of the left panel has been puttyed. Next, prepare the wood sash for reinsertion of the glass panel.
09/09/2022

The back side of the left panel has been puttyed.
Next, prepare the wood sash for reinsertion of the glass panel.

The front of the left panel has been puttyed. Next, putty the back of the panel.
09/01/2022

The front of the left panel has been puttyed.
Next, putty the back of the panel.

The left panel has been soldered on both sides and has been reframed with zinc came. Next, putty on both sides.
08/29/2022

The left panel has been soldered on both sides and has been reframed with zinc came.

Next, putty on both sides.

The releading of the left panel is complete. Next, solder all joints on both sides and attach a new zinc frame.
08/23/2022

The releading of the left panel is complete.
Next, solder all joints on both sides and attach a new zinc frame.

progress on this restortion...
08/21/2022

progress on this restortion...

The glass for the left panel has been cleaned. I have begun releading the left panel.
08/18/2022

The glass for the left panel has been cleaned. I have begun releading the left panel.

Address

1166 Skyline Drive
Watertown, SD
57201

Telephone

(605) 886-6767

Website

Alerts

Be the first to know and let us send you an email when Studio 66 Custom Design Stained Glass posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Studio 66 Custom Design Stained Glass:

Shortcuts

Share

Category