MORPH Manufacturing

MORPH Manufacturing MORPH MANUFACTURING designs and creates high end custom furniture and interior fittings. We work with timber, steel, stone and more.

Finished this little set today. What a trick. the dots on the tops are actually the end grain of the legs that pass thro...
24/10/2014

Finished this little set today. What a trick. the dots on the tops are actually the end grain of the legs that pass through the top and are left exposed. Again no nails or screws, just turned, notched and glued joints. Very tricky to get a seamless finish on the dots with a sprayed top, what a process, but it worked out perfect. Job done...

Part of the ash consignment. this little 6 seater was completed today. Finished with oil and waxed to a shine. the M&T j...
16/10/2014

Part of the ash consignment. this little 6 seater was completed today. Finished with oil and waxed to a shine. the M&T joints were taken right to the end of the boards and left exposed - just noticeable on the table top end grain

This no nails and no screws thing is getting complicated. All the joints on this coffee table were either notched to tak...
16/10/2014

This no nails and no screws thing is getting complicated. All the joints on this coffee table were either notched to take another section, turned to fit in a hole or slotted or grooved together. it was then glued, assembled, squared up and clamped in one quick maneuver. the result however, i hope will be great. i'll find out tomorrow when the clamps come off? This is also part of the Ash consignment..

So its my 5th anniversary, lucky for me the gift is something timber, so i made this little creature for my beautiful wi...
15/10/2014

So its my 5th anniversary, lucky for me the gift is something timber, so i made this little creature for my beautiful wife...

I did this room as a present for a very special little girl. But don't get any ideas people, you have to be incredibly s...
14/10/2014

I did this room as a present for a very special little girl. But don't get any ideas people, you have to be incredibly special to get a free make over like this! i had so much fun designing, fabricating, installing and fitting. it included the split matching Oregon Pine window frames below and above the mezzanine. Still need to service the original Sash Window tho, it is over 100 years old. The desk has a gelcoat surface - tough as nails, perfect for a little girl to scribble on paint on or just about anything. The tiny downlights were a great find, she calls them stars

13/10/2014

Just thought i would say thanks to BASF for unbelievable paint systems. Its the only paint company i use. Leagues ahead of the rest - http://www.basf.co.za/ecp1/SouthAfrica/en/, specifically BASF Salcomix 2K acrylic, designed to withstand harsh exterior conditions, it will last forever in your home adding long lasting vibrant colour.

Bedside units - two drawer or single door
13/10/2014

Bedside units - two drawer or single door

A floating entrance desk, solid ash, with pigeon hole wine racks. added the partition and angled door for crawl space. Y...
13/10/2014

A floating entrance desk, solid ash, with pigeon hole wine racks. added the partition and angled door for crawl space. You can never have enough storage space, especially when it comes to fine wine...:)

The A-V units were still awaiting cable management. I added a feature to the unit which brought the unit forward off the...
13/10/2014

The A-V units were still awaiting cable management. I added a feature to the unit which brought the unit forward off the wall leaving a void behind the 16mm back board for cables to be hidden in. the sides and top conceal the void by running all the back to the wall.

Decadent little floating bedside units. Chunky solid timber finished with white oil and wax polished...
13/10/2014

Decadent little floating bedside units. Chunky solid timber finished with white oil and wax polished...

a hand engraved, resin filled floor logo i did a few years back. About 350 x 500
12/10/2014

a hand engraved, resin filled floor logo i did a few years back. About 350 x 500

12/10/2014

Address

Lower Main Road, Observatory
Cape Town

Telephone

082 5353 509

Website

Alerts

Be the first to know and let us send you an email when MORPH Manufacturing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MORPH Manufacturing:

Share