05/09/2018
SAVE 30% OF YOUR WATER HEATING BILL.
R6325.00 incl VAT, based on current exchange rate.
The new DHC-E 8/10 is a powerful flexible, point of use water heating solution and will provide hot water for 3 points, Shower, Wash Basin and Kitchen.
• Stepless Control of Temperature…The DHC-E has an “Exclusive” Electronic Temperature Control which compensates for fluctuations in the flow rate and the incoming water temperature to maintain a constant water temperature output. This smart microprocessor technology is far stronger than any other tankless single phase water heating unit. Set the temperature control k**b on the front cover, and enjoy hot water between 30°C and 60°C degrees. Change the desired temperature at any time.
• In case the “Power light” is flashing while the appliance is on, this shows that the water flow exceeds the heating temperature as set on the appliance. Reduce the hot water flow in order to let the appliance achieve the set temperature. The maximum temperature is electronically limited to 60°C degrees.
• For reasons of appliance efficiency and durability (scaling), the optimum temperature setting lies between 30°C and 50°C degrees.
• Two models in one – switchable power output. The DHC-E 8/10 has the added advantage of selectable power output of 7.2kw (stage 1) or 9.6kw (stage 2) during installation via a jumper…one model specs more jobs than ever before.
• Superior, Reliable & Energy Saving Performance. The DHC-E 8/10 has a flow sensor and two temperature sensors that feed their readings into a computer. To control the temperature three heating elements are engaged in stages, achieving the temperature you desire with the lowest possible energy usage. Both the input and output water temperature and the flow rate are continually monitored.
This smart electronic temperature control microprocessor technology, ensures a steady output at the set temperature even if flow rates vary’s up or down. Tankless water heaters from other manufacturers do not maintain a steady temperature if incoming flow varies.
Simple design of plumbing system – there is no need for a T&P valve, drain or mixing valve. The design of the hot water plumbing system is very simple and straightforward due also to short pipe runs. Its compact dimensions and attractive housing, allows the DHC-E to be left unconcealed in many applications.
• Ideal for shower, basin and small kitchens or multiple basins, with one point used at a time.
• The DHC-E 8/10 can take pre-heated water up to 55 degree C.
Visit www.instantwaterheaters.co.za for more information or contact us on 082 665 3616 / [email protected]