Arc-Spray

Arc-Spray Any type of equipment in need of restoration of dimension, refurbishment or enhancing/increasing life expectancy in service.

Worn SDS 600 - 800 Pump Casing coated on wetted areas to increase life expectancy.
23/10/2017

Worn SDS 600 - 800 Pump Casing coated on wetted areas to increase life expectancy.

STELLITE cladding being applied by automated hotwire TIG process.
23/10/2017

STELLITE cladding being applied by automated hotwire TIG process.

Ram Drive Pinion worn I.D welded to allow customer to machine back to OEM dimensions.
23/10/2017

Ram Drive Pinion worn I.D welded to allow customer to machine back to OEM dimensions.

Valve Cage I.D ground to clean. Piston 420 Stainless Steel thermal sprayed and ground to new dimension to match Valve Ca...
23/10/2017

Valve Cage I.D ground to clean. Piston 420 Stainless Steel thermal sprayed and ground to new dimension to match Valve Cage.

Cast Iron Cylinder Housing coated with Aluminium Bronze to allow smoother operation of the Piston running through the bo...
23/10/2017

Cast Iron Cylinder Housing coated with Aluminium Bronze to allow smoother operation of the Piston running through the bore of the component and help prevent future possible seizure.

OD 313 mm x 2000 mm Aluminium Roll HVOF Tungsten Carbide coating, ground and polish to a 20 micron surface finish. Hardn...
23/10/2017

OD 313 mm x 2000 mm Aluminium Roll HVOF Tungsten Carbide coating, ground and polish to a 20 micron surface finish. Hardness over 65HRC achieved

High Precision Keyway cutting done on a Crankshaft on a CNC milling machine.
23/10/2017

High Precision Keyway cutting done on a Crankshaft on a CNC milling machine.

316 Stainless Steel Shaft Sleeve HVOF Tungsten Carbide coated, ground and polished.
23/10/2017

316 Stainless Steel Shaft Sleeve HVOF Tungsten Carbide coated, ground and polished.

Internal spraying process of a Nickel based coating using a Metco 5P process.Min I.D 127 mmLength: approx: 910 mm
10/05/2016

Internal spraying process of a Nickel based coating using a Metco 5P process.
Min I.D 127 mm
Length: approx: 910 mm

We received a challenge. To weld a small diameter shaft successfully. We took a 35 mm diameter shaft by 250 mm long and ...
10/05/2016

We received a challenge. To weld a small diameter shaft successfully. We took a 35 mm diameter shaft by 250 mm long and we welded the entire 250 mm length without stopping once. Build-up is 4,5 mm.
Time: approx. 22 min.
Process: Automated Hotwire TIG with oscillation.

We did a clean-up ground to see how quickly the welded material cleans and to check for any defects.

High Carbon Steel gear. The I.D Needle Roller Bearing journal was worn. Hard Faced cladded with automated I.D TIG using ...
10/05/2016

High Carbon Steel gear. The I.D Needle Roller Bearing journal was worn. Hard Faced cladded with automated I.D TIG using cold wire process. I.D diameter: 40 mm. Hardness achieved: Over 60 HRC.

Our minimum I.D in automated TIG is:
Purged: 28 mm x 610 mm
Non-purged: 38 mm x 610 mm

Minimum I.D in automated MIG is:
75 mm x 700 mm

Address

1-5 Victor Van Eck Street. Sybrand Van Niekerk Park
Meyerton
1961

Opening Hours

Monday 08:30 - 16:45
Tuesday 08:30 - 16:45
Wednesday 08:30 - 16:45
Thursday 08:30 - 16:45
Friday 08:30 - 14:00

Telephone

+27163620005

Website

Alerts

Be the first to know and let us send you an email when Arc-Spray posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Arc-Spray:

Shortcuts

Share