10/18/2026
Let’s talk about something I think about near every day.
I get all sorts of flak about CNC plasma cutting.
“Why do you need a CNC machine to do that?”
“Clearly you aren’t a very good fabricator if you can’t cut it out by hand.”
And you know what? You’re right. I’m not going to sit here and pretend I can cut a bunch of parts out by hand.
But here’s what you’re missing: WHAT IS YOUR TIME WORTH?
Sure, you can hack your parts out of a sheet of steel. Maybe waste twice as much material as you would with proper nesting, spend an hour and a half cutting everything out, and still end up with a couple of parts that need cleaned up or reworked.
Or you can hire me.
I’ll nest your parts, cut them accurately, and charge you for the work.
So what did you gain?
YOUR TIME BACK.
That hour and a half you would’ve spent fighting with a grinder and a cutting torch can now be spent finishing your project, getting another job out the door, or booking your next customer.
LESS WASTED MATERIAL.
I have no problem cutting material you supply. But that $1.50-per-pound sheet of half-inch steel is still $1.50 per pound, whether it ends up as a usable part or a pile of scrap. Proper nesting makes a difference. It’s worth more in finished parts in my hands.
ACCURATE, REPEATABLE PARTS.
Bring me a template and tell me that bolt hole needs to fit a 7/8-inch bolt. That’s what I’m here for. I can cut parts to your specified dimensions and make repeatable parts without eyeballing every measurement.
Not every fabrication shop needs a CNC plasma table. Not everybody wants one. And not everybody has the room, money, or desire to own and maintain one.
THAT’S WHERE I COME IN.
Let me make the investment. Let my machine depreciate. Let me troubleshoot it, fix it when it breaks, maintain the consumables, and do the legwork.
You keep doing what you do best. I’ll take care of the cutting.
I’m not trying to replace your shop. I’m here to make your shop more efficient.
STDP Custom CNC Plasma
Heavy weldment components. Structural steel supply. CNC plasma cutting.
www.stdpcnc.com