Rare Roots Plant Co.

Directions Website

Rare Roots Plant Co. Rare indoor plants and collectible houseplants. Specializing in rare Monstera, Anthurium, Philodendron, Hoya, and other hard-to-find tropical plants.

Based in Washington State.

10/15/2026

If your Monstera keeps falling over, STOP adding more stakes. You’re supporting it in the wrong place.

Here’s what most plant owners don’t realize.

As your Monstera grows, those massive leaves and thick climbing stems create a ton of leverage right at the base.

And if your support is just stuck into loose potting mix, eventually the whole thing starts leaning.

Here’s what I do instead.

First, I use a sturdy moss pole or wooden plank that reaches close to the bottom of the pot.

If I’m repotting, I position the support BEFORE filling the pot with chunky aroid mix.

For really top-heavy plants, I’ll secure the support to the pot itself using appropriate brackets or ties.

Then I position the back of the Monstera against the support, right where the aerial roots emerge.

And here’s the important part.

I secure the lower stem to the support with soft plant ties.

Not the leaves.

Not the petioles.

The actual climbing stem.

Now the weight is distributed along the support instead of pulling everything sideways.

That’s how you give your Monstera a stable foundation as it grows.

Follow for more rare plant care and Monstera growing tips.

Devil Monstera from cutting are available!
10/08/2026

Devil Monstera from cutting are available!

10/08/2026

You thought regular Monsteras were impressive? 🌿😈

Meet the DEVIL MONSTERA.

And if you’re into rare houseplants, unusual Monstera varieties, and wild plant genetics, this is the kind of plant that makes you stop scrolling.

Most people know Monsteras for their massive leaves, dramatic splits, and iconic tropical appearance.

But the rare plant world goes WAY beyond the Monstera deliciosa you see at your local garden center.

Unusual leaf shapes.

Wild fenestrations.

Incredible textures.

And collector plants that look like something straight out of another planet.

That’s what makes exploring rare Monsteras so addictive.

You think you’ve seen everything…

Then something like THIS shows up. 👀

And suddenly your regular houseplant collection doesn’t seem quite as exciting anymore. 😂

The craziest part?

Rare plant collecting isn’t just about finding the most expensive plant.

It’s about discovering unusual forms, watching them mature, and seeing what the next leaf will look like.

Would you add a Devil Monstera to your collection, or is this one a little TOO weird? 😈🌿

FOLLOW for more rare Monsteras, unusual houseplants, rare plant care, propagation experiments, and incredible plants you probably didn’t know existed.

10/06/2026

More humidity isn’t always the answer.

CONSISTENCY is what I’m after. 🌿💨

Indoor greenhouse cabinets and grow tents can change dramatically between lights-on and lights-off as temperature, airflow, and moisture conditions change.

So instead of obsessing over getting the highest humidity number possible, I focus on creating a stable environment.

My setup comes down to:

🌡️ Sensor placement at canopy level
I want to measure the conditions the PLANTS are actually experiencing—not just the top or bottom of the cabinet.

💨 Constant gentle airflow
Small fans help circulate humid air and reduce stagnant pockets around the foliage.

💧 Controlled humidification when needed
If I’m adding humidity, I want that moisture distributed through the space—not constantly soaking one section of the cabinet.

🚪 Managing air leakage
Weatherstripping or sealing obvious gaps can help in setups that lose humidity too quickly, while still maintaining appropriate air exchange.

And here’s the important part:

I’m not chasing 80% humidity just because somebody on Instagram said rare plants need it.

Different Anthuriums, Alocasias, Philodendrons, seedlings, and established plants can have different needs.

I’m watching humidity, temperature, airflow, substrate moisture, and how the PLANTS respond.

That’s how I dial in the environment.

Comment SETUP and I’ll send you the full gear list for my indoor greenhouse setup. 🌿

10/06/2026
10/03/2026

Nothing is more painful than watching a PERFECT new velvet Anthurium leaf start unfurling…

…and then TEAR. 😭🌿

If an emerging leaf looks stuck, my first rule is:

DON’T PULL IT OPEN.

Those new leaves are incredibly delicate, and trying to “help” with your fingers can turn a small problem into a permanently damaged leaf.

Instead, I focus on the environment around it.

If conditions are too dry, I’ll temporarily increase localized humidity around the emerging leaf without wrapping wet material directly against the delicate tissue.

Think humid microclimate, not soaking wet leaf.

Then I let the plant do the work.

No pulling.

No peeling the sheath apart.

No plant surgery because I got impatient. 😂

And remember: humidity isn’t the ONLY reason Anthurium leaves can emerge damaged.

Inconsistent watering, root problems, pests, temperature changes, physical damage, and other environmental stresses can contribute too.

The goal isn’t forcing the leaf to unfurl.

It’s creating conditions that allow it to unfurl naturally.

Especially when you’ve been waiting FOREVER for that massive velvet leaf. 👀

SAVE this for your next emergent and FOLLOW for more Anthurium care, velvet Anthuriums, rare plants, and indoor growing tips.

09/30/2026

High humidity gets ALL the attention in indoor greenhouse cabinets.

But airflow matters too. 🌿💨

When you pack tropical plants into an enclosed cabinet, you can create a warm, humid environment with very little air movement.

And if leaves stay wet for extended periods or the growing medium stays excessively wet, you’re creating conditions that can favor certain plant diseases and rot.

That’s why I run small fans inside my indoor greenhouse cabinet.

My goal isn’t blasting the plants with wind.

It’s gentle, consistent air circulation throughout the cabinet so there aren’t stagnant pockets around densely packed foliage.

A few things I pay attention to:

💨 Air movement throughout the cabinet
🌿 Space between leaves
💧 How quickly foliage dries after getting wet
🪴 Substrate moisture
🌡️ Temperature + humidity together
👀 Early signs of leaf spot, pests, or rot

And don’t blindly chase one “perfect” humidity number.

Anthuriums, Alocasias, Philodendrons, seedlings, and established plants can have different needs, and your temperature and airflow matter too.

Humidity + airflow + temperature + moisture all work together.

Your greenhouse cabinet should feel tropical.

Not like a sealed swamp. 😂

SAVE this and check the airflow in your cabinet tonight.

09/29/2026

Your Alocasia corm refuses to root, and you’ve tried everything. 🌱

Before giving up on it, take a look at something ridiculously simple:

Your water.

Tap water isn’t automatically bad for Alocasias, but water quality varies dramatically depending on where you live.

If you’re struggling with sensitive corms, experimenting with filtered, distilled, rainwater, or appropriately treated water can help you eliminate water quality as one variable.

But here’s the bigger mistake I see with Alocasia corm propagation:

DROWNING THEM. 💀

You don’t need the entire corm sitting underwater.

When using a shallow-water propagation method, I like keeping moisture around the bottom portion while leaving plenty of the corm exposed to air.

Then give it:

🌡️ Warmth
💡 Appropriate light
💧 Consistent moisture
🌱 A healthy corm
💨 Oxygen and airflow

And be patient.

Some Alocasia corms activate quickly.

Others sit there looking like a tiny potato for what feels like an eternity. 😂

There isn’t one magic water source that guarantees rooting, but controlling your propagation environment gives that corm a much better opportunity to succeed.

SAVE this for your next Alocasia corm propagation and FOLLOW for more Alocasia care, rare plant propagation, and indoor growing experiments.

09/28/2026

I put an aquarium bubbler in my plant propagation and now I’m obsessed. 🫧🌿

The idea is simple:

Plant roots need oxygen, not just water.

When you’re propagating cuttings in standing water, adding an aquarium air pump + airstone continuously aerates and circulates the water around the developing roots.

And watching those fresh white roots develop around the bubbles is ridiculously satisfying. 👀

Does adding a bubbler guarantee faster rooting?

No.

Rooting speed still depends on the plant, node health, temperature, light, genetics, and overall environment.

But for water propagation, it’s an inexpensive experiment I’ve been loving, especially with valuable rare plant cuttings.

Monstera cuttings.

Philodendrons.

Aroids.

Rare plant propagations that I REALLY don’t want turning into expensive compost. 😂

Sometimes the coolest plant-care upgrades aren’t actually made for plants.

Would you try an aquarium bubbler in your propagation?

SAVE this for your next cutting and FOLLOW for more rare plant propagation, water propagation experiments, and plant care tips.

Address

Roberts Drive
Black Diamond, WA
98010

Alerts

Be the first to know and let us send you an email when Rare Roots Plant Co. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby home improvement businesses