Daves Custom Painting LLC

06/06/2026

Painting is an Art. Your space is our Canvas. Interior Painting and select Handyman items North Charleston Downtown Hanahan Goose Creek Summerville Monks Corner Ridgeville Carnes Crossing and surrounding areas.

06/06/2026

06/05/2026

Taupe of the Morning is a lighter-toned taupe from Sherwin Williams that is a near perfect lighter version of Accessible Beige. Use this one anywhere from trim to cabinets!

06/05/2026

Sage green is everywhere, but are you tired of the same ol' shades? 🌿

I’ve got you covered with 22 of the best, true-to-tone sage greens for 2026 that no one’s talking about! 🙌

05/31/2026

Sherwin Williams Repose Gray isn't as popular as it once was, but it's still a great greige choice that has SOME warmth, but it doesn't ever go pink, yellow, orange, or even completely beige.
Repose Gray CAN have a blueish undertone that doesn't really make sense on paper, so bear that in mind!

05/31/2026

Here are my favorite colors from Sherwin Williams that closely dupe the look and feel of Benjamin Moore and Behr Swiss Coffee! 🤍☕

05/31/2026

A wall can be covered in perfect drywall and still be badly framed underneath if the layout drifts, the openings are weak, or the top plates do not carry the load cleanly. This framing example shows what has to be right before the wall is hidden: evenly spaced studs, full-height members holding the wall line straight, double top plates tying the assembly together, and dedicated framing around every window and door opening.

The details affect every trade that follows. Clean stud spacing distributes loads, gives drywall and trim reliable backing, and reduces wasted cuts. Headers and support studs move weight safely around openings instead of leaving weak gaps in the wall. Aligned framing also gives electricians and plumbers a predictable path through the build. Good walls are not created by covering mistakes with finishes. They start with a layout that stays accurate from one end to the other. A sloppy wall frame becomes everyone else’s problem later.

05/31/2026

The most classic palette and coziest bedroom for those who love neutrals. Black accent wall behind the bed, Revere Pewter on the walls, and White Dove on the doors.

05/31/2026

Dark Green Bedroom Ideas - 10 Tips for Designing a Tranquil Space ⬇️⬇️

05/30/2026

Compound Miter Saw Settings for Crown Moulding

This technical infographic illustrates the complex geometry involved in cutting crown moulding using a "flat cut" method on a compound miter saw. Unlike cutting moulding nested against the fence, the flat cut method relies on precise mathematical calculations for both the miter (horizontal angle) and the bevel (vertical tilt) to ensure that the trim sits correctly against both the wall and the ceiling. The guide specifically focuses on standard 52/38 crown moulding, providing the specific degrees required to achieve seamless inside and outside corner joints.

Key Components & Features

Spring Angle Geometry: The diagram shows the moulding positioned at a 38
∘ angle to the wall and a 52 ∘ angle to the ceiling, which defines the standard slope of the trim profile.

Corner Identification: A visual map distinguishes between Inside Corners (where walls meet at an inward angle) and Outside Corners (where walls meet at a protruding corner).

Miter and Bevel Settings:

Right Outside / Left Inside: Requires a clockwise miter of 31.6
∘ and a clockwise bevel of 33.9 ∘ .

Right Inside / Left Outside: Requires a counter-clockwise miter of 31.6
∘ and a counter-clockwise bevel of 33.9 ∘

Orientation Indicators: The guide specifies the placement of the "Crown top edge" and "Crown bottom edge" relative to the saw fence to ensure the profile is not cut upside down.

Directional Indicators: Visual arrows show the specific rotation and tilt directions for the saw blade assembly to prevent common cutting errors.

Overall Interpretation

The infographic serves as a critical reference for carpenters and DIY enthusiasts, simplifying the non-intuitive math required for compound cuts. By laying the moulding flat, the user gains more stability during the cut, but must strictly adhere to the 31.6
∘ miter and 33.9 ∘ bevel presets. This system ensures that the complex decorative profiles align perfectly at the miters, transforming a difficult architectural task into a repeatable, technical process.