Akean R Henry LLC HANDY MAN Service

Call Directions Website Contact the business

Akean R Henry LLC HANDY MAN Service We specialize in home improvement repairs restoration of homes

10/28/2026

Sink drain inspection

10/22/2026
10/21/2026

Water leak

10/18/2026

Wood rot weather damage

Every day you learn something new and seeing some interesting ways of doing things we ripped out the walls because clie...
10/17/2026

Every day you learn something new and seeing some interesting ways of doing things we ripped out the walls because client complained about leaking in her ceiling and behold. 

10/17/2026

Fall roof repair and junk removal

Major difference between a handyman and a contractor . Contractor is gonna remove and  install window. Handyman will do ...
10/16/2026

Major difference between a handyman and a contractor . Contractor is gonna remove and install window. Handyman will do the same thing but has a string of minor services that can be added like debris removal, organizing, cleanup, mopping, and vacuuming if needed  agreed or not?

10/14/2026

Problematic Homeowner

10/14/2026

Plaster ceiling repair dust control always seems to be the most difficult part.

How to turn up the hot water shower mixing valve Tools Needed• 7/64-inch Allen wrench (or small hex key)•  #2 Phillips...
10/14/2026

How to turn up the hot water shower mixing valve 
Tools Needed

• 7/64-inch Allen wrench (or small hex key)
• #2 Phillips screwdriver
• Pliers or fingers to pull out the limit stop

Step-by-Step Instructions

1. Turn off the water supply: (Optional for a simple limit stop adjustment, though recommended if you want to be safe).
2. Remove the handle:
• Locate the set screw at the bottom or underside of the shower handle.
• Use your Allen wrench to loosen and remove the set screw.
• Pull the handle straight off the valve stem.
3. Remove the trim adapter (if applicable):
• Loosen and remove the Phillips screw holding the black plastic or metal mounting ring/adapter in place.
• Pull the adapter off to expose the inner mechanism and the white/clear plastic restrictor or limit stop.
4. Adjust the Temperature Limit Stop:
• Pull the plastic Temperature Limit Stop (the inner keyed ring/tab) outward.
• To allow more hot water through, rotate the stop counter-clockwise (or reposition the tab higher/differently depending on your specific Moen model style) so the handle can turn further toward the hot side.
• Note: Moen recommends keeping the maximum temperature at or below 120°F (49°C) to prevent scalding.
5. Reassemble the Valve:
• Push the limit stop flush back into place.
• Reattach the black plastic mounting adapter and tighten its Phillips screw.
• Slide the handle back onto the stem and tighten the Allen set screw on the bottom.
6. Test the Water:
• Turn on the shower and test the temperature to make sure it is warm enough without being dangerously hot

Address

Syracuse, NY

Alerts

Be the first to know and let us send you an email when Akean R Henry LLC HANDY MAN Service posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Akean R Henry LLC HANDY MAN Service:

Shortcuts

Share